Save

CSR Hebel PowerPanelXL

Abbreviation
CMA-CM40065 (Rev3)
Valid from
21/08/2013

Information provider
Ministry of Business, Innovation and Employment
Author
CertMark International Pty Ltd T/A CertMark New Zealand
Information type
Product Certificate (CodeMark)
Format
PDF

Description

CSR Hebel PowerPanelXL is a non-loadbearing external wall cladding system that can be installed on timber or steel load bearing wall frames.

It is 75mm thick lightweight steel-reinforced Autoclaved Aerated Concrete (AAC) panels mounted vertically on cavity battens, screw fixed to the external load bearing wall. The exterior panel face is then sealed using a plastered rendered coating.

Scope
  • To be designed and installed in accordance with the Hebel PowerPanelXL External Wall System - New Zealand Design and Installation Guide (HELIT002 May 2016).
  • All joinery used in conjunction with the system must meet the requirements of NZS 4211:2008 -  Specifications for performance windows.
  • For use in Importance Level 1 and Importance Level 2 buildings, as defined in NZS 3601:2011 - Timber-framed buildings Table 1.1. up to and including three storeys high and situated in wind zones up to and inducing Extra High as determined in NZS 3604:2011
  • Where the building is situated in an Extra High wind zone or where the cladding system is used on an external wall frame without an internal lining, a rigid wall underlay shall be used.
  • For use as an external wall cladding on buildings where the wall face concerned has a building envelope risk matrix score of less than 20 as determined using Acceptable Solution E2/AS1 Section 3
  • Compliance with NZBC C6- Structural Stability is also subject to the conditions of the Structural Design Statement 9205 issued by KCL Engineering Services dated 20th April 2010.
For assistance with locating previous versions, please contact the information provider.
Download this resource (PDF, 177KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

CSR Hebel PowerPanelXL

This document is not CITED BY any other resources:

CSR Hebel PowerPanelXL

Description

CSR Hebel PowerPanelXL is a non-loadbearing external wall cladding system that can be installed on timber or steel load bearing wall frames.

It is 75mm thick lightweight steel-reinforced Autoclaved Aerated Concrete (AAC) panels mounted vertically on cavity battens, screw fixed to the external load bearing wall. The exterior panel face is then sealed using a plastered rendered coating.

Download this resource (PDF, 177KB)
CSR Hebel PowerPanelXL
Description

CSR Hebel PowerPanelXL is a non-loadbearing external wall cladding system that can be installed on timber or steel load bearing wall frames.

It is 75mm thick lightweight steel-reinforced Autoclaved Aerated Concrete (AAC) panels mounted vertically on cavity battens, screw fixed to the external load bearing wall. The exterior panel face is then sealed using a plastered rendered coating.

Download this resource (PDF, 177KB)
This resource does not cite any other resources.

CSR Hebel PowerPanelXL

This resource does not CITE any other resources.
Save
Feedback