Save

ASTM A537 / A537M - 95 (2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

Abbreviation
ASTM A537 / A537M - 95 (2000)
Valid from
15/06/1995

Information provider
American Society of Testing and Materials
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF


Description

This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.

Scope

This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.

Material under this specification is available in the following three classes:

      Yield Tensile
      Strength, Strength,
  Heat Thickness, min, ksi min, ksi
Class Treatment   [MPa] [MPa]
     
1 Normalized 21/2 in. and under[65 mm and under] 50 [345] 70 [485]
    Over 21/2 to 4 in.[Over 65 to 100 mm] 45[310] 65[450]
2 Quenched and tempered 21/2 in. and under[65 mm and under] 60 [415] 80 [550]
    Over 21/2 to 4 in.[Over 65 to 100 mm] 55[380] 75[515]
    Over 4 to 6 in.[Over 100 to 150 mm] 46[315] 70[485]
3 Quenched and tempered 21/2 in. and under[65 mm and under] 55 [380] 80 [550]
    Over 21/2 to 4 in.[Over 65 to 100 mm] 50[345] 75[515]
    Over 4 to 6 in.[Over 100 to 150 mm] 40[275] 70[485]

 

The maximum thickness of plates furnished under this specification is 4 in. [100 mm] for Class 1 and 6 in. [150 mm] for Class 2 and Class 3.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A537 / A537M - 95 (2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

This document is CITED BY:

ASTM A537 / A537M - 95 (2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

Description

This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.

View on Information Provider website
ASTM A537 / A537M - 95 (2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
Description

This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.

View on Information Provider website
This resource does not cite any other resources.

ASTM A537 / A537M - 95 (2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

This resource does not CITE any other resources.
Save
Feedback