Save

ASTM A351 / A351M - 10 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

Abbreviation
ASTM A351 / A351M - 10
Valid from
01/04/2010

Information provider
American Society of Testing and Materials
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF


Description

This standard provides a specification for austenitic steel castings for valves, flanges, fittings, and other pressure-containing parts.

Scope
  • This specification covers austenitic steel castings for valves, flanges, fittings, and other pressure-containing parts. Note —Carbon steel castings for pressure-containing parts are covered by Specification A216/A216M, low-alloy steel castings by Specification A217/A217M, and duplex stainless steel castings by Specification A995/A995M.
  • A number of grades of austenitic steel castings are included in this specification. Since these grades possess varying degrees of suitability for service at high temperatures or in corrosive environments, it is the responsibility of the purchaser to determine which grade shall be furnished. Selection will depend on design and service conditions, mechanical properties, and high-temperature or corrosion-resistant characteristics, or both.
  • Because of thermal instability, Grades CE20N, CF3A, CF3MA, and CF8A are not recommended for service at temperatures above 800°F [425°C].
  • Because of embrittlement phases, Grade CD4MCu is not recommended for service at temperatures above 600°F [316°C].

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A351 / A351M - 10 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

This document is CITED BY:

ASTM A351 / A351M - 10 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

Description

This standard provides a specification for austenitic steel castings for valves, flanges, fittings, and other pressure-containing parts.

View on Information Provider website
ASTM A351 / A351M - 10 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
Description

This standard provides a specification for austenitic steel castings for valves, flanges, fittings, and other pressure-containing parts.

View on Information Provider website
This resource does not cite any other resources.

ASTM A351 / A351M - 10 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

This resource does not CITE any other resources.
Save
Feedback