Save

ASTM A234 - 80 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures

Abbreviation
ASTM A234 - 80
Valid from
26/09/1980

Information provider
IHS Markit
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF, Hard copy


Description

This specification2 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ANSI B16.11, ANSI B16.28, and MSS SP-79. Fittings differing from these ANSI and MSS standards shall be furnished in accordance with Supplementary Requirement S9. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. 

Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements may be specified in the order. 

This specification does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A 216 and A 217. 

The values stated in inch-pound units are to be regarded as the standard. The metric equivalents may be approximate. 

2 For ASME Boiler and Pressure Vessel Code applications see related Specification SA-234 in Section II of that Code.

For assistance with locating previous versions, please contact the information provider.
Notes/comments

ANSI B16.11-1980 cites ANSI/ASTM A234-79, which is not currently available online. We have provided you with a link to this more recent version for your information only.

View on Information Provider website
For assistance with locating previous versions, please contact the information provider.

ANSI B16.11-1980 cites ANSI/ASTM A234-79, which is not currently available online. We have provided you with a link to this more recent version for your information only.

This resource is cited by:

ASTM A234 - 80 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures

This document is CITED BY:

ASTM A234 - 80 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures

Description

This specification2 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ANSI B16.11, ANSI B16.28, and MSS SP-79. Fittings differing from these ANSI and MSS standards shall be furnished in accordance with Supplementary Requirement S9. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. 

Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements may be specified in the order. 

This specification does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A 216 and A 217. 

The values stated in inch-pound units are to be regarded as the standard. The metric equivalents may be approximate. 

2 For ASME Boiler and Pressure Vessel Code applications see related Specification SA-234 in Section II of that Code.

View on Information Provider website
ASTM A234 - 80 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures
Description

This specification2 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ANSI B16.11, ANSI B16.28, and MSS SP-79. Fittings differing from these ANSI and MSS standards shall be furnished in accordance with Supplementary Requirement S9. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. 

Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements may be specified in the order. 

This specification does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A 216 and A 217. 

The values stated in inch-pound units are to be regarded as the standard. The metric equivalents may be approximate. 

2 For ASME Boiler and Pressure Vessel Code applications see related Specification SA-234 in Section II of that Code.

View on Information Provider website
This resource does not cite any other resources.

ASTM A234 - 80 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures

This resource does not CITE any other resources.
Save
Feedback