AS/NZS 61050:1998 (R2013) Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements

Abbreviation
AS/NZS 61050:1998
Valid from
4/03/1998

Information provider
Standards New Zealand,
Author
Standards New Zealand, Standards Australia
Information type
New Zealand Standard,
Format
PDF, HARD COPY,


Description

This Standard specifies general and safety requirements for single-phase transformers with separate input and output windings, for use on an a.c. supply up to 1000 V at 50/60 Hz and having a no-load output voltage exceeding 1000 V but not exceeding 10,000 V and intended for the supply of cold cathode lighting for electric advertising signs, light signals and similar purposes.

Scope

This International Standard is applicable to independent and built-in single-phase transformers with separate input and output windings, for use on a.c. supply up to 1000 V at 50 Hz or 60 Hz, to supply and stabilize cold cathode tubular lamps (or assemblies of such lamps) having a no-load rated output voltage exceeding 1000 V but not exceeding 10,000 V and intended for lighting and for electric advertising signs, light signals and similar purposes.

In order to ensure the safety of these transformers, it is necessary to check their performance. But since no standardization of the characteristics of these lamps exists, reference loads are defined in this standard to ensure reproducible test results.

In locations where special conditions prevail, as in ships, vehicles and the like, and in dangerous locations, for example, where explosions are liable to occur, special constructions may be required.

This standard does not apply to transformers intended for the supply of lamps or tubes such as low-pressure or high-pressure sodium vapour lamps, high-pressure mercury vapour lamps, halogen lamps, xenon lamps, hot cathode tubular fluorescent lamps, special lamps for document copying machines etc.

This standard does not apply to auto-transformers and electronic convertors.

This standard may, nevertheless, serve as a guide form transformers with applications other than those specified in the scope, for instance transformers for photographic lamps, as long as their characteristics remain within the framework of those specified in the scope and they are not the subject of a particular IEC standard.

Capacitors shall comply with IEC 1048, where applicable.

Tests in this standard are type tests. Guidance on routine testing is given in annex C.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS/NZS 61050:1998 (R2013) Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements

This document is CITED BY:

AS/NZS 61050:1998 (R2013) Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements

Description

This Standard specifies general and safety requirements for single-phase transformers with separate input and output windings, for use on an a.c. supply up to 1000 V at 50/60 Hz and having a no-load output voltage exceeding 1000 V but not exceeding 10,000 V and intended for the supply of cold cathode lighting for electric advertising signs, light signals and similar purposes.

View on Information Provider website
AS/NZS 61050:1998 (R2013) Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements
Description

This Standard specifies general and safety requirements for single-phase transformers with separate input and output windings, for use on an a.c. supply up to 1000 V at 50/60 Hz and having a no-load output voltage exceeding 1000 V but not exceeding 10,000 V and intended for the supply of cold cathode lighting for electric advertising signs, light signals and similar purposes.

View on Information Provider website
This resource does not cite any other resources.

AS/NZS 61050:1998 (R2013) Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements

This resource does not CITE any other resources.
Feedback