Save

AS/NZS 4548.3:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Non-aggregate

Abbreviation
AS/NZS 4548.3:1999
Valid from
04/04/1999

Author
Standards New Zealand, Standards Australia
Format
PDF


Description

This Standard provides a guide to the features and typical characteristics of long-life textured coatings, which do not utilize aggregates, intended for exterior or interior use on concrete and masonry, when applied by airless spray, hopper spray or roller in accordance with the manufacturers instructions.

Scope

Paints covered by this Standard are classified as paint Type 38 of AS 2311 and correspond generally to Australian Paint Approval Scheme specification Type 3 of GPC-C-117. Non-aggregate, low to medium profile textured latex coatings are selected for aesthetic purposes to provide attractive decorative profiles, according to the application technique used.

Application may be by textured roller, airless spray or hopper spray, depending upon the profile required, and will achieve a spreading rate of 1.02.0 m2/L (1.00.5 L/m2).

This type of coating is generally specified in a system including a topcoat of material as characterized by AS/NZS 4548.2 where maximum resistance to moisture ingress and dirt pick-up is required.

These coatings are not intended for use on horizontal surfaces where water ponding is possible. They are normally specified in systems that may have a sealer and multiple coats.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS/NZS 4548.3:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Non-aggregate

This document is CITED BY:

AS/NZS 4548.3:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Non-aggregate

Description

This Standard provides a guide to the features and typical characteristics of long-life textured coatings, which do not utilize aggregates, intended for exterior or interior use on concrete and masonry, when applied by airless spray, hopper spray or roller in accordance with the manufacturers instructions.

View on Information Provider website
AS/NZS 4548.3:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Non-aggregate
Description

This Standard provides a guide to the features and typical characteristics of long-life textured coatings, which do not utilize aggregates, intended for exterior or interior use on concrete and masonry, when applied by airless spray, hopper spray or roller in accordance with the manufacturers instructions.

View on Information Provider website
This resource does not cite any other resources.

AS/NZS 4548.3:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Non-aggregate

This resource does not CITE any other resources.
Save
Feedback