Save

AS 4321-2001(R2019) Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings

Abbreviation
AS 4321-2001
Valid from
05/01/2001

Information provider
SAI Global
Author
Standards Australia
Information type
Australian Standard
Format
PDF


Description

This Standard specifies requirements for factory-applied fusion-bonded medium-density polyethylene coating and lining of pipes and fittings, for protection against corrosion.

It is intended for use by specifiers, applicators, manufacturers and purchasers of steel water pipeline.

Polyethylene materials complying with this Standard are intended for application to pipes and fittings where the pipeline operating temperatures are not less than -40C nor more than 70C for the coating and 50C for the lining.

  • The coating is intended for use on pipes and fittings for underground and underwater service, including steel piling.
  • The lining is intended for use on pipes and fittings for pipelines conveying wastewater and water intended for human consumption.

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 4321-2001(R2019) Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings

This document is CITED BY:

AS 4321-2001(R2019) Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings

Description

This Standard specifies requirements for factory-applied fusion-bonded medium-density polyethylene coating and lining of pipes and fittings, for protection against corrosion.

It is intended for use by specifiers, applicators, manufacturers and purchasers of steel water pipeline.

Polyethylene materials complying with this Standard are intended for application to pipes and fittings where the pipeline operating temperatures are not less than -40C nor more than 70C for the coating and 50C for the lining.

  • The coating is intended for use on pipes and fittings for underground and underwater service, including steel piling.
  • The lining is intended for use on pipes and fittings for pipelines conveying wastewater and water intended for human consumption.

 

View on Information Provider website
AS 4321-2001(R2019) Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings
Description

This Standard specifies requirements for factory-applied fusion-bonded medium-density polyethylene coating and lining of pipes and fittings, for protection against corrosion.

It is intended for use by specifiers, applicators, manufacturers and purchasers of steel water pipeline.

Polyethylene materials complying with this Standard are intended for application to pipes and fittings where the pipeline operating temperatures are not less than -40C nor more than 70C for the coating and 50C for the lining.

  • The coating is intended for use on pipes and fittings for underground and underwater service, including steel piling.
  • The lining is intended for use on pipes and fittings for pipelines conveying wastewater and water intended for human consumption.

 

View on Information Provider website
This resource does not cite any other resources.

AS 4321-2001(R2019) Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings

This resource does not CITE any other resources.
Save
Feedback