AS 2327.1-2003 Composite structures. Simply supported beams

Abbreviation
AS 2327.1-2003
Valid from
18/08/2003

Information provider
Intertek Inform
Author
Standards Australia
Information type
Australian Standard
Format
PDF, HARD COPY


Description

This Standard sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam and a concrete slab interconnected with shear connectors, including applications where the slab incorporates profiled steel sheeting, as defined in Clause 1.2.


Scope

This Standard does not cover the design of composite beams— 

  1. where the elements of the steel beam are less than 3 mm thick or the value of the yield stress (fyb) assumed in design exceeds 450 MPa;
  2. where the strength grade of the slab concrete exceeds 40 MPa;
  3. where the slab is precast or prestressed;
  4. with negative design moments
  5. subjected to dynamic loads;
  6. for road or railway bridges; or 
  7. for fatigue. 


NOTE: 

  1. This does not preclude the use of steels with a minimum yield strength greater than 450 MPa. 
  2. For the design of composite beams with negative design moments reference may be made to BS 5950:3:1990, Code of Practice for Design of Simple and Continuous Composite Beams. 
  3. For the design of composite bridge beams, reference should be made to HB 77 the AUSTROADS Bridge Design Code.
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 2327.1-2003 Composite structures. Simply supported beams

This document is CITED BY:

AS 2327.1-2003 Composite structures. Simply supported beams

Description

This Standard sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam and a concrete slab interconnected with shear connectors, including applications where the slab incorporates profiled steel sheeting, as defined in Clause 1.2.


View on Information Provider website
AS 2327.1-2003 Composite structures. Simply supported beams
Description

This Standard sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam and a concrete slab interconnected with shear connectors, including applications where the slab incorporates profiled steel sheeting, as defined in Clause 1.2.


View on Information Provider website
This resource does not cite any other resources.

AS 2327.1-2003 Composite structures. Simply supported beams

This resource does not CITE any other resources.
Feedback