Kopine Flooring Systems – Ultralock™ 12 and Tongue & Groove 12

Abbreviation
CM70064 Rev1
Version
Revision 1
Valid from
17/03/2022

Information provider
Ministry of Business, Innovation and Employment,
Author
Bureau Veritas Australia Pty Ltd
Information type
Product Certificate (CodeMark),
Format
PDF,

Description

Kopine Ultralock™ 12 and Kopine Tongue & Groove12 flooring systems are high-density reconstituted wood panels manufactured by bonding radiata pine wood particles with a melamine urea formaldehyde resin using a combination of heat and pressure. The supplied glue bonds the panels together, to form a continuous flooring membrane and provides a seal against moisture, reducing any potential for edge peaking. 

Kopine Ultralock™12 and Kopine Tongue & Groove12 flooring systems are suitable for use as flooring and can provide floor diaphragm action.

Scope

1. Kopine flooring systems are certified for use in detached dwellings and within household units in multi-unit buildings and within the scope of NZS3604:2011 Timber-framed buildings, where

  • a. Concentrated loads are not greater than 180 kg, and
  • b. Uniformly distributed loads are not greater than 200kg/m2

2. Kopine flooring systems shall be:

  • a. Installed in accordance with the Kopine Installation Guide and Technical Specifications, April 2021.
  • b. protected by a membrane or other impervious finish when installed in wet and splash areas in accordance with the Kopine Installation Guide and Technical Specifications, April 2021.
  • c. exposure to weather should be kept to a minimum, and no more than 12 weeks.

3. The subfloor shall be ventilated and protected from external moisture in accordance with the Kopine Installation Guide and Technical Specifications, April 2021.

4. The moisture content of the flooring shall be no more than 18% before sealing or covering with a flooring product.

5. Where the flooring system is used on an access route as defined in Clause A2 of the Building Code it must be used on a level surface as set out in Table 2 of D1/AS1

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 409KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Kopine Flooring Systems – Ultralock™ 12 and Tongue & Groove 12

This document is not CITED BY any other resources:

Kopine Flooring Systems – Ultralock™ 12 and Tongue & Groove 12

Description

Kopine Ultralock™ 12 and Kopine Tongue & Groove12 flooring systems are high-density reconstituted wood panels manufactured by bonding radiata pine wood particles with a melamine urea formaldehyde resin using a combination of heat and pressure. The supplied glue bonds the panels together, to form a continuous flooring membrane and provides a seal against moisture, reducing any potential for edge peaking. 

Kopine Ultralock™12 and Kopine Tongue & Groove12 flooring systems are suitable for use as flooring and can provide floor diaphragm action.

View on Information Provider website Download this resource (PDF, 409KB)
Kopine Flooring Systems – Ultralock™ 12 and Tongue & Groove 12
Description

Kopine Ultralock™ 12 and Kopine Tongue & Groove12 flooring systems are high-density reconstituted wood panels manufactured by bonding radiata pine wood particles with a melamine urea formaldehyde resin using a combination of heat and pressure. The supplied glue bonds the panels together, to form a continuous flooring membrane and provides a seal against moisture, reducing any potential for edge peaking. 

Kopine Ultralock™12 and Kopine Tongue & Groove12 flooring systems are suitable for use as flooring and can provide floor diaphragm action.

View on Information Provider website Download this resource (PDF, 409KB)
This resource does not cite any other resources.

Kopine Flooring Systems – Ultralock™ 12 and Tongue & Groove 12

This resource does not CITE any other resources.
Feedback