Nu-Wall Aluminium Cladding System - Vertical on Cavity

Abbreviation
Appraisal number 870 (2019)
Amendment
10/05/2022
Valid from
15/10/2019

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

The Nu-Wall Aluminium Cladding System - Vertical on Cavity is a cavity-based interlocking powder-coated aluminium weatherboard system. It is designed to be used as an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system includes vertically fixed Nu-Wall weatherboards, cavity battens, internal and external corner mouldings, base channel, board jointers, board locators, soffit caps, joinery flashings and accessories.

The system incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall framing with a nominal 20 mm cavity.

Scope

1. The Nu-Wall Aluminium Cladding System - Vertical on Cavity has been appraised as an external wall cladding for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • situated in NZS 3604 Wind Zones up to, and including, Extra High.

2. The Nu-Wall Aluminium Cladding System - Vertical on Cavity has also been appraised for weathertightness and structural wind loading when used as an external wall cladding system for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with regard to building height and floor plan area; and,
  • constructed with timber and steel framing subject to specific engineering design; and,
  • situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 2.5 kPa.

3. The Nu-Wall Aluminium Cladding System - Vertical on Cavity must only be installed vertically on vertical, flat surfaces.

4. The Nu-Wall Aluminium Cladding System - Vertical on Cavity is appraised for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. (Note: The Appraisal of the Nu-Wall Aluminium Cladding System - Vertical on Cavity relies on the joinery meeting the requirements of NZS 4211 for the relevant Wind Zone or design wind pressure.)

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Appraisal replaces BRANZ Appraisal No. 870 (2014).

View on Information Provider website Download this resource (PDF, 757KB)
For assistance with locating previous versions, please contact the information provider.

This Appraisal replaces BRANZ Appraisal No. 870 (2014).

This resource is not cited by any other resources.

Nu-Wall Aluminium Cladding System - Vertical on Cavity

This document is not CITED BY any other resources:

Nu-Wall Aluminium Cladding System - Vertical on Cavity

Description

The Nu-Wall Aluminium Cladding System - Vertical on Cavity is a cavity-based interlocking powder-coated aluminium weatherboard system. It is designed to be used as an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system includes vertically fixed Nu-Wall weatherboards, cavity battens, internal and external corner mouldings, base channel, board jointers, board locators, soffit caps, joinery flashings and accessories.

The system incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall framing with a nominal 20 mm cavity.

View on Information Provider website Download this resource (PDF, 757KB)
Nu-Wall Aluminium Cladding System - Vertical on Cavity
Description

The Nu-Wall Aluminium Cladding System - Vertical on Cavity is a cavity-based interlocking powder-coated aluminium weatherboard system. It is designed to be used as an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The system includes vertically fixed Nu-Wall weatherboards, cavity battens, internal and external corner mouldings, base channel, board jointers, board locators, soffit caps, joinery flashings and accessories.

The system incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall framing with a nominal 20 mm cavity.

View on Information Provider website Download this resource (PDF, 757KB)
This resource does not cite any other resources.

Nu-Wall Aluminium Cladding System - Vertical on Cavity

This resource does not CITE any other resources.
Feedback