Save

SmartClad™ Bevelback Weatherboard Cavity Cladding System

Abbreviation
Appraisal number 684
Valid from
16/06/2017

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

The SmartClad™ Bevelback Weatherboard Cavity Cladding System is a cavity-based external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used. The system utilises the SmartClip™ fixing clip to aid speed of installation.

The system consists of horizontally fixed SmartClad™ Bevelback timber weatherboards installed over timber battens to form the cavity, flashings and accessories and is finished with a 100% premium acrylic house paint.

The system incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

Scope

The SmartClad™ Bevelback Weatherboard Cavity Cladding System has been appraised as an external horizontally fixed wall cladding system for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • constructed with timber framing complying with the NZBC; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • situated in NZS 3604 Wind Zones up to, and including Extra High'.

The SmartClad™ Bevelback Weatherboard Cavity Cladding System has also been appraised for weathertightness and structural wind loading when used as an external horizontally fixed wall cladding system for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • constructed with timber framing complying with the NZBC; and,
  • situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 2.5 kPa.

The SmartClad™ Bevelback Weatherboard Cavity Cladding System is appraised for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. (The Appraisal of the SmartCladTM Bevelback Weatherboard Cavity Cladding System relies on the joinery meeting the requirements of NZS 4211 for the relevant Wind Zone, or be specifically designed for use in specifically designed buildings.)

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Appraisal replaces BRANZ Appraisal No. 684 (2010).

View on Information Provider website Download this resource (PDF, 442KB)
For assistance with locating previous versions, please contact the information provider.

This Appraisal replaces BRANZ Appraisal No. 684 (2010).

This resource is not cited by any other resources.

SmartClad™ Bevelback Weatherboard Cavity Cladding System

This document is not CITED BY any other resources:

SmartClad™ Bevelback Weatherboard Cavity Cladding System

Description

The SmartClad™ Bevelback Weatherboard Cavity Cladding System is a cavity-based external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used. The system utilises the SmartClip™ fixing clip to aid speed of installation.

The system consists of horizontally fixed SmartClad™ Bevelback timber weatherboards installed over timber battens to form the cavity, flashings and accessories and is finished with a 100% premium acrylic house paint.

The system incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

View on Information Provider website Download this resource (PDF, 442KB)
SmartClad™ Bevelback Weatherboard Cavity Cladding System
Description

The SmartClad™ Bevelback Weatherboard Cavity Cladding System is a cavity-based external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used. The system utilises the SmartClip™ fixing clip to aid speed of installation.

The system consists of horizontally fixed SmartClad™ Bevelback timber weatherboards installed over timber battens to form the cavity, flashings and accessories and is finished with a 100% premium acrylic house paint.

The system incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

View on Information Provider website Download this resource (PDF, 442KB)
This resource does not cite any other resources.

SmartClad™ Bevelback Weatherboard Cavity Cladding System

This resource does not CITE any other resources.
Save
Feedback