Description

The StoArmat Render System is a jointing and exterior render system for use as a finishing system for EasyLap™ Panel.

The system consists of a 2.5-3.5 mm thick fibreglass mesh reinforced synthetic resin bond coat render and an approximate 1-3 mm thick coat of coloured finishing render. The render system is finished with a Sto coating.  

Scope

1.The StoArmat Render System has been appraised for use as a jointing and exterior render system for EasyLap™ Panel on buildings within the following scope:

• the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
• with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
• situated in NZS 3604 Wind Zones up to, and including, Extra High.

2. The StoArmat Render System has also been appraised for use as a jointing and exterior render system for EasyLap™ Panel on buildings subject to specific design up to an ultimate limit state (ULS) wind pressure of 2.5 kPa; and,

• within the scope limitations of BRANZ Appraisal No. 466 EasyLap™ Panel for Texture Coating.

3. EasyLap™ Panel must be used, designed and installed as described in BRANZ Appraisal No. 466 and the EasyLap™ Panel Technical Literature.

4. Installation of components and accessories supplied by Stoanz Limited and Sto registered contractors must be carried out only by Sto registered contractors.