Save

Spider P Roof and Deck Membranes

Abbreviation
Appraisal number 1081
Valid from
29/10/2019

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

Spider P Roof and Deck Membranes are a double layer, Atactic Polypropylene modified, polyester reinforced, bitumen, self adhesive membranes for roofs, decks and balconies. 

Scope

Spider P Roof and Deck Membranes has been appraised as roof and deck waterproofing membranes on buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; or
  • the scope of limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with regards to building height and floor plan area when subject to specific structural design; and,
  • with substrates of plywood or suspended concrete slab; and,
  • with minimum falls for roofs of 1:30 and decks of 1:40; and,
  • with deck size limited to 40 m2; and,
  • situated in NZS 3604 Wind Zones, up to, and including Extra High.

Spider P Roof and Deck Membrane has also been appraised for use as roof and deck waterproofing membranes on buildings within the following scope:

  • subject to specific structural and weathertightness design; and,
  • with substrates of plywood or suspended concrete slab; and,
  • situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 6.0 kPa and,
  • with the weathertightness design of junctions for each specific structure being the responsibility of the building designer.

Roofs and decks waterproofed with Spider P Roof and Deck Membranes must be designed and constructed in accordance with the following limitations:

  • nominally flat or pitched roofs and decks constructed to drain water to gutters and drainage outlets complying with the NZBC; and,
  • with no steps within the deck level, no integral roof gardens and no downpipe direct discharge to the deck; and,
  • with the deck membranes continually protected from physical damage by pedestal protection system.

The design and construction of the substrate and movement and control joints is specific to each building, and therefore is the responsibility of the building designer and building contractor and is outside the scope of this appraisal.

This membranes must be installed by Mapei New Zealand Ltd approved installers.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 411KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Spider P Roof and Deck Membranes

This document is not CITED BY any other resources:

Spider P Roof and Deck Membranes

Description

Spider P Roof and Deck Membranes are a double layer, Atactic Polypropylene modified, polyester reinforced, bitumen, self adhesive membranes for roofs, decks and balconies. 

View on Information Provider website Download this resource (PDF, 411KB)
Spider P Roof and Deck Membranes
Description

Spider P Roof and Deck Membranes are a double layer, Atactic Polypropylene modified, polyester reinforced, bitumen, self adhesive membranes for roofs, decks and balconies. 

View on Information Provider website Download this resource (PDF, 411KB)
This resource does not cite any other resources.

Spider P Roof and Deck Membranes

This resource does not CITE any other resources.
Save
Feedback