Save

AS/NZS 16834:2013 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD)

Abbreviation
AS/NZS 16834:2013
Valid from
20/02/2013

Information provider
Standards New Zealand
Author
Standards Australia, Standards New Zealand
Information type
New Zealand Standard
Format
PDF

Description

This Standard specifies requirements for manufacturers and users on the classification of wire electrodes, wires, rods and weld deposits. Covers the as-welded condition and the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and classified with different shielding gases.

Also provides for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. Reproduced with national modifications from ISO 16834:2012.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

AS/NZS 16834:2013 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD)

This document is not CITED BY any other resources:

AS/NZS 16834:2013 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD)

Description

This Standard specifies requirements for manufacturers and users on the classification of wire electrodes, wires, rods and weld deposits. Covers the as-welded condition and the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and classified with different shielding gases.

Also provides for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. Reproduced with national modifications from ISO 16834:2012.

View on Information Provider website
AS/NZS 16834:2013 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD)
Description

This Standard specifies requirements for manufacturers and users on the classification of wire electrodes, wires, rods and weld deposits. Covers the as-welded condition and the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and classified with different shielding gases.

Also provides for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. Reproduced with national modifications from ISO 16834:2012.

View on Information Provider website
This resource does not cite any other resources.

AS/NZS 16834:2013 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD)

This resource does not CITE any other resources.
Save
Feedback