ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths

Abbreviation
ISO 7240-25:2010
Valid from
11/05/2010

Information provider
Standards New Zealand
Author
International Organization for Standardization
Information type
ISO Standard
Format
PDF, HARD COPY


Description

ISO 7240-25:2010 specifies requirements, test methods and performance criteria for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of ISO 7240-25:2010.

Where components work together and this requires knowledge of the system design, ISO 7240-25:2010 also specifies requirements for the system.

When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of ISO 7240 apply together with ISO 7240-25:2010. Requirements relevant to wire transmission paths are superseded or modified by those included in ISO 7240-25:2010.

ISO 7240-25:2010 does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices; the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; or the allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths

This document is CITED BY:

ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths

Description

ISO 7240-25:2010 specifies requirements, test methods and performance criteria for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of ISO 7240-25:2010.

Where components work together and this requires knowledge of the system design, ISO 7240-25:2010 also specifies requirements for the system.

When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of ISO 7240 apply together with ISO 7240-25:2010. Requirements relevant to wire transmission paths are superseded or modified by those included in ISO 7240-25:2010.

ISO 7240-25:2010 does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices; the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; or the allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path.

View on Information Provider website
ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths
Description

ISO 7240-25:2010 specifies requirements, test methods and performance criteria for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of ISO 7240-25:2010.

Where components work together and this requires knowledge of the system design, ISO 7240-25:2010 also specifies requirements for the system.

When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of ISO 7240 apply together with ISO 7240-25:2010. Requirements relevant to wire transmission paths are superseded or modified by those included in ISO 7240-25:2010.

ISO 7240-25:2010 does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices; the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; or the allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path.

View on Information Provider website
This resource does not cite any other resources.

ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths

This resource does not CITE any other resources.
Feedback