Hermpac Accoya® Board and Batten Weatherboard Cavity System

Abbreviation
GM-CM30141 RevA
Version
Revision A
Valid from
19/01/2022

Information provider
Ministry of Business, Innovation and Employment
Author
Global-Mark Pty Ltd
Information type
Product Certificate (CodeMark)
Format
PDF

Description

The Hermpac Accoya® Board and Batten Weatherboard Cavity System is an external vertically fixed wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The Hermpac Accoya® Board and Batten Weatherboard Cavity System consists of vertically fixed weatherboards, ventilated cavity battens, flashings and accessories.

Scope

1. The Hermpac Accoya® Board and Batten Weatherboard Cavity System is certified for buildings (other than those containing risk group SI) :

  • a. constructed with timber framing within the scope of NZBC Acceptable Solution E2/AS1, Third Edition including amendment 10 (5/11/2020) Paragraph 1.1, and
    • i. with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Third Edition (including amendment 9, 27/06/2019) Table 2, and,
    • ii. situated in NZS 3604:2011 Wind Zones up to and including Extra High; or
  • b. constructed with timber framing subject to specific engineering design within the scope limitations of NZBC Acceptable Solution E2/AS1, Third Edition (including amendment 9, 27/06/2019) Paragraph 1.1 with regards to building height and floor plan area, and
    • i. for up to a maximum design differential ultimate limit state (ULS) wind pressure of 2.5 kPa, and
  • c. situated
    • i. in all exposure zones (excluding microclimates) as defined in NZS3604:2011, Paragraph 4.2.4 NZS3604:2011, and
    • ii. more than 1m from a relevant boundary.

2. The Hermpac Accoya® Board and Batten Weatherboard Cavity System must be designed, used, installed and maintained in accordance with:

  • a. the scope of this Certificate; and
  • b. the statements and conditions of the supporting BRANZ appraisal No. 1184 (2021) Hermpac Accoya® Board and Batten Weatherboard Cavity System; and
  • c. the Hermpac Accoya® Board and Batten Weatherboard Cavity System Installation Specifications, V1, Nov 2021 including
    • i. the construction drawings applicable (see section 9), and
    • ii. the finish requirements applicable to the oil/stain or paint system used.

3. The Hermpac Accoya® Board and Batten Weatherboard Cavity System must be only installed vertically on vertical, flat surfaces.

4. Only stainless steel fixings can be used with The Hermpac Accoya® Board and Batten Weatherboards.

5. Only aluminium window and door joinery meeting the requirements of NZS 4211:2008 (including Amendment1) for the relevant Wind Zone or wind pressure and installed with vertical jambs and horizontal heads and sills shall be used with The Hermpac Accoya® Board and Batten Weatherboard Cavity System.

6. The designer shall provide a signed Declaration for submission with the building consent application that the use of this product in the proposed building work falls within the scope of this certificate and that all design conditions of this certificate have been met.

7. The installer shall supply a signed Quality Assurance Checklist Hermpac Accoya® Board and Batten Weatherboard Cavity System (Dec2021 V1) for consideration for issuing a Code Compliance Certificate (CCC).

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 350KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Hermpac Accoya® Board and Batten Weatherboard Cavity System

This document is not CITED BY any other resources:

Hermpac Accoya® Board and Batten Weatherboard Cavity System

Description

The Hermpac Accoya® Board and Batten Weatherboard Cavity System is an external vertically fixed wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The Hermpac Accoya® Board and Batten Weatherboard Cavity System consists of vertically fixed weatherboards, ventilated cavity battens, flashings and accessories.

View on Information Provider website Download this resource (PDF, 350KB)
Hermpac Accoya® Board and Batten Weatherboard Cavity System
Description

The Hermpac Accoya® Board and Batten Weatherboard Cavity System is an external vertically fixed wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.

The Hermpac Accoya® Board and Batten Weatherboard Cavity System consists of vertically fixed weatherboards, ventilated cavity battens, flashings and accessories.

View on Information Provider website Download this resource (PDF, 350KB)
This resource does not cite any other resources.

Hermpac Accoya® Board and Batten Weatherboard Cavity System

This resource does not CITE any other resources.
Feedback