Schindler Lifts NZ Ltd – Lift design, specification, manufacture and installation

Abbreviation
CM70036 Rev 1
Version
Revision 1
Valid from
27/06/2022

Information provider
Ministry of Business, Innovation and Employment
Author
Bureau Veritas
Information type
Product Certificate (CodeMark)
Format
PDF

Description

The certificate covers the design (engineering design and specification of lift componentry) and construction (manufacture and installation) of the following Schindler lift models: 2400, 2500, 2600, 3000, 3300, 5000, and 5500.

It is referred to as the Schindler methodology.

Schindler Lifts NZ Ltd design, manufacture, supply and install mechanical lifts in new buildings that comply with B1/VM1 Amd 18 or where an engineer has established that the existing building has sufficient structural integrity to withstand the building work associated with the installation of the lift.

Scope

1. Hydraulic lift installations fall outside the scope of this certificate.

2. This certificate may only be used as a means of compliance when accompanied by a Schindler declaration that the specification, design, manufacture is in accordance with the Schindler methodology that is specified in this certificate.

3. Prior to the Code Compliance Certificate being issued a Schindler declaration must be provided that installation is in accordance with the Schindler methodology that is specified in this certificate.

4. Schindler Lifts NZ Ltd Maintenance Schedule is to be submitted with the building consent application and incorporated in the compliance schedule.

5. Compliance with D1.3.4 (b) only applies where the lift car has the following internal dimensions: Not less than 1200 x 2100mm OR not less than 1400 x 1400mm.

6. Where the lift car width is less than 1400mm the lift controls are to be located on the adjacent wall.

7. Any changes to a lift specification will then fall outside the scope of this certificate even if approved by Schindler Lifts NZ Ltd.

8. This certificate may be relied upon as a means of compliance when considering a building consent application (Building Design, Building Materials) and also as evidence of compliance with the building consent (Method of Construction) provided that all conditions of this certificate are met.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 308KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Schindler Lifts NZ Ltd – Lift design, specification, manufacture and installation

This document is not CITED BY any other resources:

Schindler Lifts NZ Ltd – Lift design, specification, manufacture and installation

Description

The certificate covers the design (engineering design and specification of lift componentry) and construction (manufacture and installation) of the following Schindler lift models: 2400, 2500, 2600, 3000, 3300, 5000, and 5500.

It is referred to as the Schindler methodology.

Schindler Lifts NZ Ltd design, manufacture, supply and install mechanical lifts in new buildings that comply with B1/VM1 Amd 18 or where an engineer has established that the existing building has sufficient structural integrity to withstand the building work associated with the installation of the lift.

View on Information Provider website Download this resource (PDF, 308KB)
Schindler Lifts NZ Ltd – Lift design, specification, manufacture and installation
Description

The certificate covers the design (engineering design and specification of lift componentry) and construction (manufacture and installation) of the following Schindler lift models: 2400, 2500, 2600, 3000, 3300, 5000, and 5500.

It is referred to as the Schindler methodology.

Schindler Lifts NZ Ltd design, manufacture, supply and install mechanical lifts in new buildings that comply with B1/VM1 Amd 18 or where an engineer has established that the existing building has sufficient structural integrity to withstand the building work associated with the installation of the lift.

View on Information Provider website Download this resource (PDF, 308KB)
This resource does not cite any other resources.

Schindler Lifts NZ Ltd – Lift design, specification, manufacture and installation

This resource does not CITE any other resources.
Feedback