Clelands Timber Weatherboard Cladding

Abbreviation
CM70014 Rev 1
Version
Revision 1
Valid from
11/06/2021

Information provider
Ministry of Business, Innovation and Employment
Author
Bureau Veritas Australia Pty Ltd
Information type
Product Certificate (CodeMark)
Format
PDF

Description

Clelands Timber Weatherboard Cladding is an exterior wall cladding for timber-framed buildings

Clelands Timber Weatherboard Cladding consists of LOSP H3.1 or H3.2 treated solid or finger jointed weatherboards of the following profiles:

Bevel Back

  • Standard WB/WBO - sizes 135 x 18mm, 142 x 18mm, 180 x 18mm, 187 x 18mm, 215 x 19mm, 230 x 19mm
  • Rebated WBR- sizes 135 x 18mm
  • Imperial WBB - sizes 140 x 21mm

Rusticated

  • Standard WR - sizes 135 x 18, 180 x 18mm
  • Wellingtonian WL- sizes 180 x 19mm, 215 x 19mm, 230 x 19mm
  • Hawkes Bay WHB - sizes 135 x 18mm, 180 x 18mm, 215 x 19mm, 230 x 19mm

Vertical Shiplap

  • Standard WS - sizes 135 x 18mm and 180 x 18mm

Scope

1. Clelands Timber Weatherboard Cladding is certified for use in buildings:

  • a) within the scope of NZS3604:2011 Timber-framed buildings, and
  • b) within the scope of E2/AS1 para 1.1, and
  • c) located in a wind zone (as defined in NZS3604:2011) up to and including Very High, and
  • d) where the risk score (as determined using the E2/AS1 risk matrix) is not greater than 20 and fixed as set out in Conditions 2, and
  • e) located in any exposure zone as defined in NZS3604 para 4.2.4 (except microclimates), and
  • f) located no closer than 1m from a relevant boundary

2. Clelands Timber Weatherboard Cladding profiles shall:

  • a) for bevelback profile, be fixed horizontally over a nominal 20 mm drained and ventilated cavity where the Risk Score is 13 - 20 (or direct fixed or cavity fixed where the Risk Score is 0 - 12);
  • b) for rusticated profile be fixed horizontally over a nominal 20 mm drained and ventilated cavity where the Risk Score is 7 - 20 (or direct fixed or cavity fixed where the Risk Score is 0 - 6);
  • c) shiplap profile be fixed vertically over a nominal 20 mm drained and ventilated cavity where the Risk Score is 13 - 20 (or direct fixed or cavity fixed where the Risk Score is 0 - 12)

3. Clelands Timber Weatherboard Cladding shall be:

  • a) installed in accordance with the applicable Installation Manual:
    • Clelands Timber Bevel Back Weatherboard Installation Manual, December 2020
    • Clelands Timber Rusticated Weatherboard Installation Manual, December 2020
    • Clelands Timber Weatherboard Cladding Shiplap Installation Manual, December 2020, and
  • b) painted using a light colour (with a light reflective value (LRV) greater than or equal to 45%).
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 950KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Clelands Timber Weatherboard Cladding

This document is not CITED BY any other resources:

Clelands Timber Weatherboard Cladding

Description

Clelands Timber Weatherboard Cladding is an exterior wall cladding for timber-framed buildings

Clelands Timber Weatherboard Cladding consists of LOSP H3.1 or H3.2 treated solid or finger jointed weatherboards of the following profiles:

Bevel Back

  • Standard WB/WBO - sizes 135 x 18mm, 142 x 18mm, 180 x 18mm, 187 x 18mm, 215 x 19mm, 230 x 19mm
  • Rebated WBR- sizes 135 x 18mm
  • Imperial WBB - sizes 140 x 21mm

Rusticated

  • Standard WR - sizes 135 x 18, 180 x 18mm
  • Wellingtonian WL- sizes 180 x 19mm, 215 x 19mm, 230 x 19mm
  • Hawkes Bay WHB - sizes 135 x 18mm, 180 x 18mm, 215 x 19mm, 230 x 19mm

Vertical Shiplap

  • Standard WS - sizes 135 x 18mm and 180 x 18mm

View on Information Provider website Download this resource (PDF, 950KB)
Clelands Timber Weatherboard Cladding
Description

Clelands Timber Weatherboard Cladding is an exterior wall cladding for timber-framed buildings

Clelands Timber Weatherboard Cladding consists of LOSP H3.1 or H3.2 treated solid or finger jointed weatherboards of the following profiles:

Bevel Back

  • Standard WB/WBO - sizes 135 x 18mm, 142 x 18mm, 180 x 18mm, 187 x 18mm, 215 x 19mm, 230 x 19mm
  • Rebated WBR- sizes 135 x 18mm
  • Imperial WBB - sizes 140 x 21mm

Rusticated

  • Standard WR - sizes 135 x 18, 180 x 18mm
  • Wellingtonian WL- sizes 180 x 19mm, 215 x 19mm, 230 x 19mm
  • Hawkes Bay WHB - sizes 135 x 18mm, 180 x 18mm, 215 x 19mm, 230 x 19mm

Vertical Shiplap

  • Standard WS - sizes 135 x 18mm and 180 x 18mm
View on Information Provider website Download this resource (PDF, 950KB)
This resource does not cite any other resources.

Clelands Timber Weatherboard Cladding

This resource does not CITE any other resources.
Feedback