BS EN ISO 9239-1:2010 Reaction to fire tests for floorings. Determination of the burning behaviour using a radiant heat source

Abbreviation
BS EN ISO 9239-1:2010
Valid from
31/08/2010

Information provider
Standards New Zealand
Author
British Standards Institution, European Standardization Organisations, International Organization for Standardization
Information type
British Standard
Format
PDF, Hard copy


Description

This Standard specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.

This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.

This Standard is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

BS EN ISO 9239-1:2010 Reaction to fire tests for floorings. Determination of the burning behaviour using a radiant heat source

This document is CITED BY:

BS EN ISO 9239-1:2010 Reaction to fire tests for floorings. Determination of the burning behaviour using a radiant heat source

Description

This Standard specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.

This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.

This Standard is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

View on Information Provider website
BS EN ISO 9239-1:2010 Reaction to fire tests for floorings. Determination of the burning behaviour using a radiant heat source
Description

This Standard specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.

This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.

This Standard is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

View on Information Provider website
This resource does not cite any other resources.

BS EN ISO 9239-1:2010 Reaction to fire tests for floorings. Determination of the burning behaviour using a radiant heat source

This resource does not CITE any other resources.
Feedback