AS/NZS 4671:2019 Steel for the reinforcement of concrete
- Abbreviation
- AS/NZS 4671:2019
- Valid from
- 13/12/2019
- Replaces
- , , , AS/NZS 4671:2001
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
Objective of this Standard is to provide materials specifications for steel bars and welded mesh used to reinforce concrete structures that have been designed in accordance with standards such as AS 3600 Concrete structures, or NZS 3101.1 Concrete structures standard, Part 1.
This Standard has also been referenced by other design standards.
Scope
This Standard specifies requirements for the chemical composition and the mechanical and geometrical properties of reinforcing steel used for the reinforcement of concrete in the form of:
- (a) deformed or plain bars and coils;
- (b) machine-welded mesh; and
- (c) continuously threaded bars.
This Standard does not apply to prestressing steels, stainless steel reinforcement, epoxy-coated steels and galvanized steels.
NOTE 1. Prestressing steels are covered by AS/NZS 4672.2.
This resource is cited by:
AS/NZS 4671:2019 Steel for the reinforcement of concrete
This document is CITED BY:
-
B1/AS1 (Amd 20) (First edition, Amendment 20)
AS/NZS 4671:2019 is cited by Acceptable Solution B1/AS1: General from 29/11/2021
-
B1/AS1 (Amd 21) (First Edition, Amendment 21)
AS/NZS 4671:2019 is cited by Acceptable Solution B1/AS1: General from 29/11/2021
-
B1/AS3 (Amd 20) (First edition, Amendment 20)
AS/NZS 4671:2019 is cited by Acceptable Solution B1/AS3: Small Chimneys from 29/11/2021
-
B1/AS3 (Amd 21) (First Edition, Amendment 21)
AS/NZS 4671:2019 is cited by Acceptable Solution B1/AS3: Small Chimneys from 29/11/2021
-
B1/VM1 (Amd 20) (First edition, Amendment 20)
AS/NZS 4671:2019 is cited by Verification Method B1/VM1: Structure - General from 29/11/2021
-
B1/VM1 (Amd 21) (First Edition, Amendment 21)
AS/NZS 4671:2019 is cited by Verification Method B1/VM1: Structure - General from 29/11/2021
-
AS/NZS 3500.3:2021
AS/NZS 4671:2019 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
-
CCANZ CP 01:2022
AS/NZS 4671:2019 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
This resource cites:
AS/NZS 4671:2019 Steel for the reinforcement of concrete
This document CITES:
New Zealand Standards
-
AS/NZS 1050.1:1996
AS/NZS 4671:2019 cites AS/NZS 1050.1:1996 (R2016) Methods for the analysis of iron and steel - Part 1: Sampling iron and steel for chemical analysis
-
AS/NZS 1554.3:2014
AS/NZS 4671:2019 cites AS/NZS 1554.3:2014 Structural steel welding - Part 3: Welding of reinforcing steel
Australian Standards
-
AS 1391-2007 (Reconfirmed in 2017)
AS/NZS 4671:2019 cites AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature
-
AS ISO/IEC 17025:2018
AS/NZS 4671:2019 cites AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories
Other
-
ASTM E415 - 17
AS/NZS 4671:2019 cites ASTM E415 - 17 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
-
ISO 15630-1:2019
AS/NZS 4671:2019 cites ISO 15630-1:2019 Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, rods and wire
-
ISO 15630-2:2019
AS/NZS 4671:2019 cites ISO 15630-2:2019 Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric and lattice girders
-
ISO 6892-1:2019
AS/NZS 4671:2019 cites ISO 6892-1:2019 Metallic materials — Tensile testing — Part 1: Method of test at room temperature