AS 4139-2003 (R2018) Fibre reinforced concrete pipes and fittings
- Abbreviation
- AS 4139-2003
- Valid from
- 5/08/2003
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies minimum requirements for pipes and fittings manufactured from fibre-reinforced concrete using standard curing, including autoclaving, for the conveyance of gravity water supply, and stormwater, waste water and sewage drainage.
Scope
Four classes of pipes are covered by this Standard, distinguished on the basis of long-term design load: Class 1, Class 2, Class 3, and Class 4. Other classes of pipe may be designed using the principles described in this Standard. This Standard addresses the effect of creep under load by either, regression analysis of pipe materials (see Appendix H), or long-term stiffness prediction.
NOTES:
1 Fibre-reinforced concrete pipe is herein referred to as 'pipe'.
2 The load classes correspond with those of AS 4058.
3 This Standard does not cover the assessment of external service loads to which a pipe will be subjected to in a particular installation. Purchasers should, therefore, satisfy themselves that the class of pipe specified or selected on the basis of this Standard is suitable for its intended application. For buried pipes, reference to AS 3725 is required.
4 Guidance on the information to be supplied by the purchaser at the time of enquiry or order is given in Appendix A.
5 Appendix B provides concentration limits for commonly occurring soil/terrain constituents of the buried environment, but does not provide special requirements for pipes intended for use in environments aggressive to concrete. Where such applications are envisaged, the advice of the manufacturer should be sought.
This resource is cited by:
AS 4139-2003 (R2018) Fibre reinforced concrete pipes and fittings
This document is CITED BY:
-
G13/AS2 (Second Edition, Amendment 6)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 5)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 4)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Amd 3) (Second Edition, Amendment 3)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 7)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 8)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Amd 9) (Second Edition, Amendment 9)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Amd 10) (Second Edition, Amendment 10)
AS 4139-2003 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
AS/NZS 3500.2:2003
AS 4139-2003 is cited by AS/NZS 3500.2:2003 Plumbing and drainage - Sanitary plumbing and drainage
-
AS/NZS 3500.2:2015
AS 4139-2003 is cited by AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.2:2018
AS 4139-2003 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.3:2018
AS 4139-2003 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS 4139-2003 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
-
AS/NZS 3725:2007
AS 4139-2003 is cited by AS/NZS 3725:2007 Design for installation of buried concrete pipes
This resource cites:
AS 4139-2003 (R2018) Fibre reinforced concrete pipes and fittings
This document CITES:
AS 4139-2003 cites AS/NZS 2566.1:1998 (R2018) Buried Flexible pipelines. Structural Design
AS 4139-2003 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS 4139-2003 cites AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement - Amorphous silica
AS 4139-2003 cites SANZ/SAA HB 18.28:1991 Guidelines for third-party certification and accreditation - Guide 28 - General rules for a model third-party certification system for products
AS 4139-2003 cites AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 4139-2003 cites AS 1379-1997 Specification and supply of concrete
AS 4139-2003 cites AS 1478.1-2000 (R2018) Chemical admixtures for concrete, mortar and grout - Admixtures for concrete
AS 4139-2003 cites AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS 4139-2003 cites AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 4139-2003 cites AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 4139-2003 cites AS 2193-2002 Calibration and classification of force-measuring systems
AS 4139-2003 cites AS 2490-1997 Sampling procedures and charts for inspection by variables for percent nonconforming
AS 4139-2003 cites AS 2758.1-1998 Aggregates and rock for engineering purposes
AS 4139-2003 cites AS 3582.1-1998 Supplementary cementitious materials for use with portland and blended cement - Fly ash
AS 4139-2003 cites AS 3582.2-2001 Supplementary cementitious materials for use with portland and blended cement - Part 2: Slag - Ground granulated iron blast-furnace
AS 4139-2003 cites AS 3725-1989 Loads on buried concrete pipes
AS 4139-2003 cites AS 3972-1997 General purpose and blended cements
AS 4139-2003 cites ISO 10928:1997 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
AS 4139-2003 cites ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS 4139-2003 cites ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming