AS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings
- Abbreviation
- AS 1668.1:2015
- Amendment
- Amendment 1 - incorporated.
- Valid from
- 14/12/2015
- Information provider
- Intertek Inform
- Author
- Standards Australia
- Information type
- Australian Standard
- Format
- PDF, HARD COPY
Description
This Standard sets out minimum requirements for the design, construction, installation and commissioning of mechanical smoke control systems in buildings.
Specific methods of smoke control are defined and the appropriate requirements specified for each.
Scope
The design information given in this Standard in respect to hot layer smoke control is based on a single axisymmetric plume, which is confined to on reservoir. Smoke plumes spilling across multiple reservoirs are not considered.
Requirements for the maintenance of smoke control systems are not included.
This Standard applies to Class 2 to Class 9 buildings where smoke control is required.
The Standard doesn't identify those buildings in which smoke control systems or pressurization systems are required.
This resource is cited by:
AS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings
This document is CITED BY:
-
C/AS1 (Second Edition) (Second Edition)
AS 1668.1:2015 is cited by Acceptable Solution C/AS1: Protection from fire for buildings with sleeping (residential) and outbuildings (risk group SH)
-
C/AS2 (Amd 3) (First Edition, Amendment 3.)
AS 1668.1:2015 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 2/11/2023
This resource cites:
AS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings
This document CITES:
New Zealand Standards
-
AS/NZS 1530.3:1999
AS 1668.1:2015 cites AS/NZS 1530.3:1999 (R2016) Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release
-
AS/NZS 3000:2007
AS 1668.1:2015 cites AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 3013:2005
AS 1668.1:2015 cites AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements
-
AS/NZS 3103:1993
AS 1668.1:2015 cites AS/NZS 3103:1993 Approval and test specification - Electric room heaters
-
AS/NZS 3179:1993
AS 1668.1:2015 cites AS/NZS 3179:1993 Approval and test specification - Refrigerated room air conditioners
Australian Standards
-
AS 1668.2-2012
AS 1668.1:2015 cites AS 1668.2-2012 The use of ventilation and airconditioning in buildings - Part 2: Mechanical ventilation in buildings
-
AS 1324.1-2001
AS 1668.1:2015 cites AS 1324.1-2001 Air filters for use in general ventilation and airconditioning - Part 1: Application, performance and construction
-
AS 1530.1:1994 (R2016)
AS 1668.1:2015 cites AS 1530.1-1994 (R2016) Methods for fire tests on building materials, components and structures. Combustibility test for materials
-
AS 1530.4:2014
AS 1668.1:2015 cites AS 1530.4:2014 Methods for fire tests on building materials, components and structures. Part 4: Fire-resistance tests for elements of construction
-
AS 1670.1:2015
AS 1668.1:2015 cites AS 1670.1:2015 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Part 1: Fire
-
AS 1682.1:2015
AS 1668.1:2015 cites AS 1682.1:2015 Fire, smoke and air dampers - Part 1: Specification
-
AS 1682.2:2015
AS 1668.1:2015 cites AS 1682.2:2015 Fire, smoke and air dampers - Part 2: Installation
-
AS 1735.2-2001
AS 1668.1:2015 cites AS 1735.2-2001 Lifts, escalators and moving walks Passenger and goods lifts - Part 2: Electric
-
AS 2118.1-2006
AS 1668.1:2015 cites AS 2118.1-2006 Automatic fire sprinkler systems - Part 1: General systems
-
AS 2484.1-1990 (R2016)
AS 1668.1:2015 cites AS 2484.1-1990 (R2016) Fire - Glossary of terms - Part 1: Fire tests
-
AS 3102-1983
AS 1668.1:2015 cites AS 3102-1983 Approval and test specification for electric duct heaters
-
AS 4072.1-2005 (R2016)
AS 1668.1:2015 cites AS 4072.1-2005 (R2016) Components for the protection of openings in fire-resistant separating elements. Part 1: Service penetrations and control joints
-
AS 4254.1-2012
AS 1668.1:2015 cites AS 4254.1-2012 Ductwork for air-handling systems in buildings. Part 1: Flexible duct
-
AS 4254.2-2012
AS 1668.1:2015 cites AS 4254.2-2012 Ductwork for air-handling systems in buildings. Part 2: Rigid duct
-
AS 4260-1997
AS 1668.1:2015 cites AS 4260-1997 (R2018) High efficiency particulate air (HEPA) filters - Classification, construction and performance
-
AS 4429-1999
AS 1668.1:2015 cites AS 4429-1999 Methods of test and rating requirements for smoke-spill fans
Other
-
NCC 2015 - Complete Series
AS 1668.1:2015 cites NCC 2015 - National Construction Code of Australia - Complete Series