AS 1289.5.3.5-1997 (R2013) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method

Abbreviation
AS 1289.5.3.5-1997 (R2013)
Valid from
5/10/1997

Information provider
Intertek Inform
Author
Standards Australia
Information type
Australian Standard
Format
PDF, HARD COPY


Description

This Standard sets out the method for determining the field dry density of a natural or compacted coarse-grained soil by the water replacement method, using a circular density ring on the surface and a plastic sheet to retain the water (see Notes 1 and 2).

This test is particularly appropriate for soils containing appreciable proportions of cobbles and boulders as defined in AS 1289.0, e.g. rock fill.

The gross mass per unit volume (wet density) may be computed and the dry mass per unit volume (dry density) obtained by correcting for the moisture content.

The field dry density is determined either for the total material or for material finer than 19.0 mm, unless otherwise specified.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 1289.5.3.5-1997 (R2013) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method

This document is CITED BY:

AS 1289.5.3.5-1997 (R2013) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method

Description

This Standard sets out the method for determining the field dry density of a natural or compacted coarse-grained soil by the water replacement method, using a circular density ring on the surface and a plastic sheet to retain the water (see Notes 1 and 2).

This test is particularly appropriate for soils containing appreciable proportions of cobbles and boulders as defined in AS 1289.0, e.g. rock fill.

The gross mass per unit volume (wet density) may be computed and the dry mass per unit volume (dry density) obtained by correcting for the moisture content.

The field dry density is determined either for the total material or for material finer than 19.0 mm, unless otherwise specified.

View on Information Provider website
AS 1289.5.3.5-1997 (R2013) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
Description

This Standard sets out the method for determining the field dry density of a natural or compacted coarse-grained soil by the water replacement method, using a circular density ring on the surface and a plastic sheet to retain the water (see Notes 1 and 2).

This test is particularly appropriate for soils containing appreciable proportions of cobbles and boulders as defined in AS 1289.0, e.g. rock fill.

The gross mass per unit volume (wet density) may be computed and the dry mass per unit volume (dry density) obtained by correcting for the moisture content.

The field dry density is determined either for the total material or for material finer than 19.0 mm, unless otherwise specified.

View on Information Provider website
This resource does not cite any other resources.

AS 1289.5.3.5-1997 (R2013) Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method

This resource does not CITE any other resources.
Feedback