Paslode Stud/Plate Connection
- Appraisal number 565
- Valid from
- Information provider
- BRANZ Limited
- Information type
- BRANZ Appraisal
The Paslode Stud / Plate Connection is a timber stud to plate joint using power driven nails as prescribed in Table 8.19 of NZS 3604.
The connection incorporates the use of 90 x 3.15 mm power driven Paslode nails.
The Paslode Stud / Plate Connection has been appraised for use as a connection detail in buildings within the following scope:
- buildings within the scope of Section 1.1 of NZS 3604; and
- with a maximum stud height, from the bottom of the bottom plate to the top of the top plate, of 2.7 m.