Sto Armat Plaster System

Abbreviation
Appraisal number 488
Amendment
02 September 2013
Valid from
21/12/2006

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

The Sto Armat Plaster System is a jointing and exterior plaster system for use as a finishing system for Monotek® Sheet - Cavity Construction and the VentClad Ventilated Cavity System.

The system consists of a fibreglass mesh reinforced jointing plaster, followed by a 2.5 - 3.5 mm thick fibreglass mesh reinforced bond coat plaster, followed by a 1 - 3 mm thick finishing plaster. The plaster system is finished with a mineral silicone resin or acrylic exterior paint system.

Scope

The Sto Armat Plaster System has been appraised for use as a jointing and exterior plaster system for Monotek® Sheet - Cavity Construction and the VentClad Ventilated Cavity System on buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 and,
  • constructed with timber framing complying with the NZBC; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • situated in NZS 3604 Wind Zones up to, and including Extra High.

The Sto Armat Plaster System has also been appraised for use as a jointing and exterior plaster system for Monotek® Sheet - Cavity Construction on buildings subject to specific design up to an ultimate limit state (ULS) wind pressure of 2500 Pa; and,

  • constructed with timber framing complying with the NZBC; and,
  • within the scope limitations of BRANZ Appraisal No. 466 (2005) Monotek® Sheet - Cavity Construction.

Monotek® Sheet - Cavity Construction must be used, designed and installed as described in BRANZ Appraisal No. 466 (2005) and the Monotek® Sheet - Cavity Construction Technical Literature.

The VentClad Ventilated Cavity System must be used, designed and installed as described in BRANZ Appraisal No. 457 (2010) and the VentClad Ventilated Cavity System Technical Literature.

Installation of components and accessories supplied by Stoanz Limited must be carried out only by Stoanz Limited approved applicators.

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Appraisal replaces BRANZ Appraisal No. 488 (2005)

View on Information Provider website Download this resource (PDF, 219KB)
For assistance with locating previous versions, please contact the information provider.

This Appraisal replaces BRANZ Appraisal No. 488 (2005)

This resource is not cited by any other resources.

Sto Armat Plaster System

This document is not CITED BY any other resources:

Sto Armat Plaster System

Description

The Sto Armat Plaster System is a jointing and exterior plaster system for use as a finishing system for Monotek® Sheet - Cavity Construction and the VentClad Ventilated Cavity System.

The system consists of a fibreglass mesh reinforced jointing plaster, followed by a 2.5 - 3.5 mm thick fibreglass mesh reinforced bond coat plaster, followed by a 1 - 3 mm thick finishing plaster. The plaster system is finished with a mineral silicone resin or acrylic exterior paint system.

View on Information Provider website Download this resource (PDF, 219KB)
Sto Armat Plaster System
Description

The Sto Armat Plaster System is a jointing and exterior plaster system for use as a finishing system for Monotek® Sheet - Cavity Construction and the VentClad Ventilated Cavity System.

The system consists of a fibreglass mesh reinforced jointing plaster, followed by a 2.5 - 3.5 mm thick fibreglass mesh reinforced bond coat plaster, followed by a 1 - 3 mm thick finishing plaster. The plaster system is finished with a mineral silicone resin or acrylic exterior paint system.

View on Information Provider website Download this resource (PDF, 219KB)
This resource does not cite any other resources.

Sto Armat Plaster System

This resource does not CITE any other resources.
Feedback