Flexi-Seal® Interior Waterproofing Systems
- Appraisal number 474
- Valid from
- Information provider
- BRANZ Limited
- Information type
- BRANZ Appraisal
Flexi-Seal® Interior Waterproofing Systems are liquid applied, waterproofing membrane systems for use under ceramic and stone tiles in internal wet areas.
Flexi-Seal® Interior Waterproofing Membranes have been appraised for use as waterproofing membrane for internal wet areas of buildings, within the following scope:
- on floor substrates of concrete, flooring grade particleboard, plywood, fibre cement compressed sheet and fibre cement sheet tile underlay, and on wall substrates of wet area fibre cement sheet lining systems and wet area plasterboard lining systems; and,
- when protected from physical damage by ceramic tiles or stone finishes; and,
- where floors are designed and constructed such that deflections do not exceed 1/360th of the span.
The use of Flexi-Seal® Interior Waterproofing Systems on concrete slabs where hydrostatic or vapour pressure is present from below is outside the scope of this Appraisal.
Movement and control joints in the substrate must be carried through the membrane and the tile finish. The design and construction of the substrate and movement and control joints is specific to each building, and therefore the responsibility of the building designer and building contractor and is outside the scope of this Appraisal.
The ceramic or stone tile finishes are outside the scope of this Appraisal.
The membranes must be installed by trained installers, approved by RLA Polymers (NZ) Ltd.