AS/NZS 4859.1:2018 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions
- Abbreviation
- AS/NZS 4859.1:2018
- Valid from
- 19/11/2018
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard provides general criteria, technical provisions and methods of test for materials that are used for thermal insulation within buildings, including materials used for thermal insulation of ductwork and pipework. Specific requirements for individual materials or insulation types are given in Sections 4 to 9.
Scope
This Standard does NOT address the following:
- a) Materials for the insulation of windows or glazing.
- b) Fire performance
- c) Installation requirements of thermal insulation
- d) Performance requirements of systems or materials that have some primary function other than providing thermal insulation.
This resource is cited by:
AS/NZS 4859.1:2018 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions
This document is CITED BY:
-
H1/AS1 (Fifth edition) (Fifth edition, unamended)
AS/NZS 4859.1:2018 is cited by Acceptable Solution H1/AS1: Energy efficiency for all housing, and buildings up to 300 m². from 29/11/2021
-
H1/AS1 (Fifth edition, Amd 1) (Fifth edition, Amendment 1)
AS/NZS 4859.1:2018 is cited by Acceptable Solution H1/AS1: Energy efficiency for all housing, and buildings up to 300 m². from 29/11/2021
-
H1/AS2 (First edition) (First edition, unamended)
AS/NZS 4859.1:2018 is cited by Acceptable Solution H1/AS2: Energy efficiency for buildings greater than 300 m². from 29/11/2021
-
H1/AS2 (First edition, Amd 1) (First edition, Amendment 1)
AS/NZS 4859.1:2018 is cited by Acceptable Solution H1/AS2: Energy efficiency for buildings greater than 300 m². from 29/11/2021
-
H1/VM1 (Fifth edition) (Fifth edition, unamended)
AS/NZS 4859.1:2018 is cited by Verification Method H1/VM1: Energy efficiency for all housing, and buildings up to 300 m². from 29/11/2021
-
H1/VM1 (Fifth edition, Amd 1) (Fifth edition, Amendment 1)
AS/NZS 4859.1:2018 is cited by Verification Method H1/VM1: Energy efficiency for all housing, and buildings up to 300 m². from 29/11/2021
-
H1/VM2 (First edition) (First edition, unamended)
AS/NZS 4859.1:2018 is cited by Verification Method H1/VM2: Energy efficiency for buildings greater than 300 m². from 29/11/2021
-
H1/VM2 (First edition, Amd 1) (First edition, Amendment 1)
AS/NZS 4859.1:2018 is cited by Verification Method H1/VM2: Energy efficiency for buildings greater than 300 m². from 29/11/2021
-
H1/VM3 (First edition) (First edition, unamended)
AS/NZS 4859.1:2018 is cited by Verification Method H1/VM3: Energy efficiency of HVAC systems in commercial buildings. from 29/11/2021
This resource cites:
AS/NZS 4859.1:2018 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions
This document CITES:
New Zealand Standards
-
AS/NZS 1134:1999
AS/NZS 4859.1:2018 cites AS/NZS 1134:1999 Wool - Determination of wool base and vegetable matter base of core samples of raw wool
-
AS/NZS 1595:1998
AS/NZS 4859.1:2018 cites AS/NZS 1595:1998 (R2016) Cold-rolled, unalloyed, steel sheet and strip
-
AS/NZS 4200.1:2017
AS/NZS 4859.1:2018 cites AS/NZS 4200.1:2017 Pliable building membranes and underlays - Part 1: Materials
-
AS/NZS 4201.1:1994
AS/NZS 4859.1:2018 cites AS/NZS 4201.1:1994 Pliable building membranes and underlays - Methods of test - Method 1: Resistance to dry delamination
Australian Standards
-
AS 2001.6.1-1980 (R2016)
AS/NZS 4859.1:2018 cites AS 2001.6.1-1980 (R2016) Methods of test for textiles Miscellaneous tests - Part 6.1: Determination of the resistance of textiles to certain insect pests
-
AS 2001.7-2005
AS/NZS 4859.1:2018 cites AS 2001.7-2005 (R 2016) Methods of test for textiles - Quantitative analysis of fibre mixtures (BS 4407:1988, MOD)
-
AS 4200.2:2017
AS/NZS 4859.1:2018 cites AS 4200.2:2017 Pliable building membranes and underlays. - Installation
Other
-
ASTM C1363:2011
AS/NZS 4859.1:2018 cites ASTM C1363:2011 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
-
ASTM C1667-15
AS/NZS 4859.1:2018 cites ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
-
ASTM C167 - 18
AS/NZS 4859.1:2018 cites ASTM C167 - 18 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
-
ASTM C177-13
AS/NZS 4859.1:2018 cites ASTM C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
-
ASTM C335/C335M-17
AS/NZS 4859.1:2018 cites ASTM C335/C335M-17 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
-
ASTM C518-17
AS/NZS 4859.1:2018 cites ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
-
ASTM C687-18
AS/NZS 4859.1:2018 cites ASTM C687-18 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
-
ASTM C739-17
AS/NZS 4859.1:2018 cites ASTM C739-17 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
-
BS EN 12667:2001
AS/NZS 4859.1:2018 cites BS EN 12667:2001 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance.
-
BS EN 12939:2001
AS/NZS 4859.1:2018 cites BS EN 12939:2001 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance.
-
BS EN 13164:2012+A1:2015
AS/NZS 4859.1:2018 cites BS EN 13164:2012+A1:2015 Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products. Specification
-
BS EN 13165:2012+A1:2016
AS/NZS 4859.1:2018 cites BS EN 13165:2012+A1:2016 Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products. Specification
-
BS EN 13166:2012+A1:2016
AS/NZS 4859.1:2018 cites BS EN 13166:2012+A1:2016 Thermal insulation products for buildings. Factory made phenolic foam (PF) products. Specification
-
ISO 8301:1991
AS/NZS 4859.1:2018 cites ISO 8301:1991 Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus
-
ISO 8302:1991
AS/NZS 4859.1:2018 cites ISO 8302:1991 Thermal insulation - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus
-
ISO 8990:1994
AS/NZS 4859.1:2018 cites ISO 8990:1994 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box