AS/NZS 3000:2018 Electrical installations - Known as the Australian/New Zealand Wiring Rules
- Abbreviation
- AS/NZS 3000:2018
- Valid from
- 26/06/2018
- Replaces
- AS/NZS 3000:2007
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard sets out requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations.
These requirements are intended to protect persons, livestock, and property from electric shock, fire and physical injury hazards that may arise from an electrical installation that is used with reasonable care and with due regard to the intended purpose of the electrical installation.
In addition, guidance is provided so that the electrical installation will function correctly for the purpose intended and takes into account mitigating the foreseeable adverse effects of disruption to supply.
- Part 1 provides uniform essential elements that constitute the minimum regulatory requirements for a safe electrical installation. It also provides an alternative regulatory vehicle for Australian and New Zealand regulators seeking to move from the present prescription of AS/NZS 3000 in electrical installation safety and licensing legislation.
- Part 2 provides installation practices that are deemed to comply with the essential safety requirements of Part 1. This edition is bound with a plastic coil, not with a ring binder as in the previous edition.
This resource is cited by:
AS/NZS 3000:2018 Electrical installations - Known as the Australian/New Zealand Wiring Rules
This document is CITED BY:
-
C/AS1 (Second Edition) (Second Edition)
AS/NZS 3000:2018 is cited by Acceptable Solution C/AS1: Protection from fire for buildings with sleeping (residential) and outbuildings (risk group SH) from 2/11/2023
-
C/AS2 (Amd 3) (First Edition, Amendment 3.)
AS/NZS 3000:2018 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 2/11/2023
-
AS/NZS 3500.3:2018
AS/NZS 3000:2018 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS/NZS 3000:2018 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
-
NZS 4510:2022
AS/NZS 3000:2018 is cited by NZS 4510:2022 Fire hydrant systems - SPONSORED
-
NZS 4512:2021
AS/NZS 3000:2018 is cited by NZS 4512:2021 Fire detection and alarm systems in buildings -SPONSORED
This resource cites:
AS/NZS 3000:2018 Electrical installations - Known as the Australian/New Zealand Wiring Rules
This document CITES:
New Zealand Standards
-
60335.2.41:2013 (AS/NZS)
AS/NZS 3000:2018 cites AS/NZS 60335.2.41:2013 Household and similar electrical appliances - Safety - Part 2.41: Particular requirements for pumps
-
AS/NZS 1668.1:2015
AS/NZS 3000:2018 cites AS/NZS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings
-
AS/NZS 2053.1:2001
AS/NZS 3000:2018 cites AS/NZS 2053.1:2001 Conduits and fittings for electrical installations - General requirements
-
AS/NZS 2053.2:2001
AS/NZS 3000:2018 cites AS/NZS 2053.2:2001 (R2016) Conduits and fittings for electrical installations - Rigid plain conduits and fittings of insulating material
-
AS/NZS 2053.4:1995
AS/NZS 3000:2018 cites AS/NZS 2053.4:1995 Conduits and fittings for electrical installations - Flexible plain conduits and fittings of insulating material
-
AS/NZS 2053.5:2001
AS/NZS 3000:2018 cites AS/NZS 2053.5:2001 Conduits and fittings for electrical installations - Corrugated conduits and fittings of insulating material
-
AS/NZS 2053.6:2001
AS/NZS 3000:2018 cites AS/NZS 2053.6:2001 Conduits and fittings for electrical installations - Profile-wall, smooth-bore conduits and fittings of insulating material
-
AS/NZS 2648.1:1995
AS/NZS 3000:2018 cites AS/NZS 2648.1:1995 Underground marking tape - Non-detectable tape
-
AS/NZS 3001:2008
AS/NZS 3000:2018 cites AS/NZS 3001:2008 Electrical Installations - Transportable structures and vehicles including their site supplies
-
AS/NZS 3002:2008
AS/NZS 3000:2018 cites AS/NZS 3002:2008 Electrical installations - Shows and carnivals
-
AS/NZS 3003:2011
AS/NZS 3000:2018 cites AS/NZS 3003:2011 Electrical installations - Patient areas
-
AS/NZS 3008.1.2:2017
AS/NZS 3000:2018 cites AS/NZS 3008.1.2:2017 Electrical installations - Selection of cables - Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
-
AS/NZS 3010:2017
AS/NZS 3000:2018 cites AS/NZS 3010:2017 Electrical installations - Generating sets
-
AS/NZS 3012:2010
AS/NZS 3000:2018 cites AS/NZS 3012:2010 Electrical installations - Construction and demolition sites
-
AS/NZS 3013:2005
AS/NZS 3000:2018 cites AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements
-
AS/NZS 3015:2004
AS/NZS 3000:2018 cites AS/NZS 3015:2004 Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks
-
AS/NZS 3100:2017
AS/NZS 3000:2018 cites AS/NZS 3100:2017 Approval and test specification - General requirements for electrical equipment
-
AS/NZS 3111:2009
AS/NZS 3000:2018 cites AS/NZS 3111:2009 Approval and test specification - Miniature overcurrent circuit-breakers
-
AS/NZS 3112:2011
AS/NZS 3000:2018 cites AS/NZS 3112:2011 Approval and test specification - Plugs and socket-outlets
-
AS/NZS 3131:2015
AS/NZS 3000:2018 cites AS/NZS 3131:2015 Approval and test specification - Plugs and socket-outlets for stationary appliances
-
AS/NZS 3133:2013
AS/NZS 3000:2018 cites AS/NZS 3133:2013 Approval and test specification - Air break switches
-
AS/NZS 3190:2016
AS/NZS 3000:2018 cites AS/NZS 3190:2016 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
-
AS/NZS 3194:2015
AS/NZS 3000:2018 cites AS/NZS 3194:2015 Approval and test specification - Electric shaver supply units
-
AS/NZS 3820:2009
AS/NZS 3000:2018 cites AS/NZS 3820:2009 Essential safety requirements for electrical equipment
-
AS/NZS 4296:1995
AS/NZS 3000:2018 cites AS/NZS 4296:1995 (R2016) Cable trunking systems
-
AS/NZS 4509.1:2009
AS/NZS 3000:2018 cites AS/NZS 4509.1:2009 (R2016) Stand-alone power systems - Part 1: Safety and installation
-
AS/NZS 4763:2011
AS/NZS 3000:2018 cites AS/NZS 4763:2011 Safety of portable inverters
-
AS/NZS 4777.1:2016
AS/NZS 3000:2018 cites AS/NZS 4777.1:2016 Grid connection of energy systems via inverters - Part 1: Installation requirements
-
AS/NZS 5000.1:2005
AS/NZS 3000:2018 cites AS/NZS 5000.1:2005 (R2016) Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kV
-
AS/NZS 5000.2:2006
AS/NZS 3000:2018 cites AS/NZS 5000.2:2006 (R2016) Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V
-
AS/NZS 5000.3:2003
AS/NZS 3000:2018 cites AS/NZS 5000.3:2003 (R2016) Electric cables - Polymeric insulated - Part 3: Multicore control cables
-
AS/NZS 5033:2014
AS/NZS 3000:2018 cites AS/NZS 5033:2014 Installation and safety requirements for photovoltaic (PV) arrays
-
AS/NZS 5110:2011
AS/NZS 3000:2018 cites AS/NZS 5110:2011 Recessed luminaire barriers
-
AS/NZS 5601.1:2013
AS/NZS 3000:2018 cites AS/NZS 5601.1:2013 Gas installations - General installations
-
AS/NZS 60079.0:2012
AS/NZS 3000:2018 cites AS/NZS 60079.0:2012 Explosive atmospheres - Part 0: General requirements
-
AS/NZS 60079.10.1:2009
AS/NZS 3000:2018 cites AS/NZS 60079.10.1:2009 Explosive atmospheres - Part 10.1: Classification of areas - Explosive gas atmospheres
-
AS/NZS 60079.10.2:2016
AS/NZS 3000:2018 cites AS/NZS 60079.10.2:2016 Explosive atmospheres - Part 10.2: Classification of areas - Explosive dust atmospheres
-
AS/NZS 60079.14:2017
AS/NZS 3000:2018 cites AS/NZS 60079.14:2017 Explosive atmospheres - Part 14: Design selection, erection and initial inspection
-
AS/NZS 60079.17:2017
AS/NZS 3000:2018 cites AS/NZS 60079.17:2017 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
-
AS/NZS 60335.2.76:2003
AS/NZS 3000:2018 cites AS/NZS 60335.2.76:2003 Household and similar electrical appliances - Safety - Part 2.76: Particular requirements for electric fence energizers
-
AS/NZS 60898.1:2004
AS/NZS 3000:2018 cites AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
-
AS/NZS 61008.1:2015
AS/NZS 3000:2018 cites AS/NZS 61008.1:2015 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
-
AS/NZS 61009.1:2015
AS/NZS 3000:2018 cites AS/NZS 61009.1:2015 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
-
AS/NZS 61058.1:2008
AS/NZS 3000:2018 cites AS/NZS 61058.1:2008 Switches for appliances - Part 1: General requirements
-
AS/NZS 61439.1:2016
AS/NZS 3000:2018 cites AS/NZS 61439.1:2016 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
-
AS/NZS 61439.2:2016
AS/NZS 3000:2018 cites AS/NZS 61439.2:2016 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
-
AS/NZS 61439.3:2016
AS/NZS 3000:2018 cites AS/NZS 61439.3:2016Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
-
AS/NZS 61439.4:2016
AS/NZS 3000:2018 cites AS/NZS 61439.4:2016 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
-
AS/NZS 61535:2011
AS/NZS 3000:2018 cites AS/NZS 61535:2011 Installation couplers intended for permanent connection in fixed installations
-
AS/NZS 61558.1:2008
AS/NZS 3000:2018 cites AS/NZS 61558.1:2008 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
-
AS/NZS 61558.2.15:2001
AS/NZS 3000:2018 cites AS/NZS 61558.2.15:2001 Safety of power transformers, power supply units and similar - Part 2.15: Particular requirements for isolating transformers for the supply of medical locations
-
AS/NZS 61558.2.16:2010
AS/NZS 3000:2018 cites AS/NZS 61558.2.16:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 1000 V – Part 2.16: Particular requirements and tests for switch mode power supply units and transformers for switch mode
-
AS/NZS 61558.2.23:2011
AS/NZS 3000:2018 cites AS/NZS 61558.2.23:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2.23: Particular requirements and tests for transformers and power supply units for construction sites
-
AS/NZS 61558.2.3:2011
AS/NZS 3000:2018 cites AS/NZS 61558.2.3:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2.3: Particular requirements and tests for ignition transformers for gas and oil burners
-
AS/NZS 61558.2.4:2009
AS/NZS 3000:2018 cites AS/NZS 61558.2.4:2009 Safety of power transformers, power supply units and similar. Part 2.4 - Particular requirements - Particular requirements for isolating transformers and power supply units incorporating isolating transformers
-
AS/NZS 61558.2.5:2011
AS/NZS 3000:2018 cites AS/NZS 61558.2.5:2011 Safety of transformers, reactors, power supply units and combinations thereof – Part 2.5: Particular requirements and test for transformers for shavers, power supply units for shavers and shaver supply units
-
AS/NZS 61558.2.6:2009
AS/NZS 3000:2018 cites AS/NZS 61558.2.6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2.6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety i
-
AS/NZS 61558.2.7:2008
AS/NZS 3000:2018 cites AS/NZS 61558.2.7:2008 Safety of power transformers, power supply units and similar - Part 2.7: Particular requirements - Particular requirements for transformers and power supplies for toys
-
AS/NZS 61558.2.8:2011
AS/NZS 3000:2018 cites AS/NZS 61558.2.8:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2.8: Particular requirements and tests for transformers and power supply units for bells and chimes
-
AS/NZS 61558.2.9:2011
AS/NZS 3000:2018 cites AS/NZS 61558.2.9:2011 Safety of power transformers, power supplies, reactors and combinations thereof - Part 2.9: Particular requirements for transformers and power supply units for class III handlamps for tungsten filament lamps
-
AS/NZS IEC 60947.2:2015
AS/NZS 3000:2018 cites AS/NZS IEC 60947.2:2015
-
AS/NZS IEC 60947.3:2015
AS/NZS 3000:2018 cites AS/NZS IEC 60947.3:2015 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
-
AS/NZS IEC 60947.4.1:2015
AS/NZS 3000:2018 cites AS/NZS IEC 60947.4.1:2015 Low-voltage switchgear and controlgear - Part 4.1: Contactors and motor-starters - Electromechanical contactors and motor-starters
-
AS/NZS IEC 60947.4.2:2015
AS/NZS 3000:2018 cites AS/NZS IEC 60947.4.2:2015 Low-voltage switchgear and controlgear - Part 4.2: Contactors and motor-starters - AC semiconductor motor controllers and starters
-
AS/NZS IEC 60947.8:2015
AS/NZS 3000:2018 cites AS/NZS IEC 60947.8:2015 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
-
AS/NZS IEC 61439.5:2016
AS/NZS 3000:2018 cites AS/NZS IEC 61439.5:2016 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
-
AS/NZS IEC 61439.6:2016
AS/NZS 3000:2018 cites AS/NZS IEC 61439.6:2016 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)
-
NZS 3104:2003
AS/NZS 3000:2018 cites NZS 3104:2003 Specification for concrete production
-
NZS 3123:2009
AS/NZS 3000:2018 cites NZS 3123:2009 Specification for pozzolan for use with Portland and blended cement
-
NZS 4246:2016
AS/NZS 3000:2018 cites NZS 4246:2016 Energy efficiency - Installing bulk thermal insulation in residential buildings - SPONSORED
-
NZS 4512:2010
AS/NZS 3000:2018 cites NZS 4512:2010 Fire detection and alarm systems in buildings -SPONSORED
-
NZS 6110:2007
AS/NZS 3000:2018 cites NZS 6110:2007 Electrical installations - Floor and ceiling heating systems
-
NZS 6115:2006
AS/NZS 3000:2018 cites NZS 6115:2006 Electrical installations - Mobile medical facilities
Australian Standards
-
AS 3011.1-1992
AS/NZS 3000:2018 cites AS 3011.1-1992 Electrical installations - Secondary batteries installed in buildings - Part 1: Vented cells
-
AS 3011.2-1992
AS/NZS 3000:2018 cites AS 3011.2-1992 Electrical installations - Secondary batteries installed in buildings - Part 2: Sealed cells
-
AS 4702-2000 (R2013)
AS/NZS 3000:2018 cites AS 4702-2000 (R2013) Polymeric cable protection covers
Other
-
BS 1363-2:2016+A1:2018
AS/NZS 3000:2018 cites BS 1363-2:2016+A1:2018 13 A plugs, socket-outlets, adaptors and connection units, Part 2: Specification for 13 A switched and unswitched socket-outlets
-
IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV
AS/NZS 3000:2018 cites IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
-
IEC 62606:2013+AMD1:2017
AS/NZS 3000:2018 cites IEC 62606:2013+AMD1:2017 General requirements for arc fault detection devices
-
NZBC G9
AS/NZS 3000:2018 cites Building Code Clause G9 - Electricity
-
NZECP 55:2016
AS/NZS 3000:2018 cites NZECP 55:2016 Managing Electrical Risks Associated with Electrically Conductive Thermal Insulation
-
SR 2010/36
AS/NZS 3000:2018 cites Electricity (Safety) Regulations 2010
-
TCF Premises Wiring Guidelines
AS/NZS 3000:2018 cites New Zealand Telecommunication Forum (TCF) - Premises Wiring Guidelines.