AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
- Abbreviation
- AS/NZS 1477:2006
- Amendment
- AS/NZS 1477:2006 A1 . - incorporated. Published 20/12/2009.
- Valid from
- 12/09/2006
- Replaces
- AS/NZS 1477:1999
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.
This resource is cited by:
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
This document is CITED BY:
-
G12/AS1 (Third Edition, Amendment 7)
AS/NZS 1477:2006 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 8)
AS/NZS 1477:2006 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 10)
AS/NZS 1477:2006 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 1477:2006 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 11)
AS/NZS 1477:2006 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 9)
AS/NZS 1477:2006 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
AS/NZS 1477:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
G14/VM1 (Second Edition, Amendment 4)
AS/NZS 1477:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
G14/VM1 (Amd 5) (Second Edition, Amendment 5)
AS/NZS 1477:2006 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
AS 1646-2007
AS/NZS 1477:2006 is cited by AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
-
AS/NZS 1254:2010
AS/NZS 1477:2006 is cited by AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1260:2009
AS/NZS 1477:2006 is cited by AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications
-
AS/NZS 2032:2006
AS/NZS 1477:2006 is cited by AS/NZS 2032:2006 Installation of PVC pipe systems
-
AS/NZS 3500.1:2015
AS/NZS 1477:2006 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3518:2013
AS/NZS 1477:2006 is cited by AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications
-
AS/NZS 3879:2011
AS/NZS 1477:2006 is cited by AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
-
AS/NZS 5601.1:2010
AS/NZS 1477:2006 is cited by AS/NZS 5601.1:2010 Gas installations - Part 1: General installations
-
AS/NZS 5601.1:2013
AS/NZS 1477:2006 is cited by AS/NZS 5601.1:2013 Gas installations - General installations
-
NZS 4515:2009
AS/NZS 1477:2006 is cited by NZS 4515:2009 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres) - SPONSORED
-
NZS 4541:2007
AS/NZS 1477:2006 is cited by NZS 4541:2007 Automatic fire sprinkler systems
-
NZS 4541:2013
AS/NZS 1477:2006 is cited by NZS 4541:2013 Automatic fire sprinkler systems
This resource cites:
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
This document CITES:
New Zealand Standards
-
AS/NZS 1462.11:1996
AS/NZS 1477:2006 cites AS/NZS 1462.11:1996 (R2017) Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
-
AS/NZS 1462.15:1996
AS/NZS 1477:2006 cites AS/NZS 1462.15:1996 (R2017) Methods of test for plastics pipes and fittings - Method 15: Method for determination of vinyl chloride monomer content
-
AS/NZS 1462.16:2006
AS/NZS 1477:2006 cites AS/NZS 1462.16:2006 (R2017) Methods of test for plastics pipes and fittings - Method 16: Method for high temperature testing of pipe
-
AS/NZS 1462.19:2006
AS/NZS 1477:2006 cites AS/NZS 1462.19:2006 (R2017) Methods of test for plastics pipes and fittings - Method 19: C-ring test for fracture toughness of PVC pipes
-
AS/NZS 1462.1:2001
AS/NZS 1477:2006 cites AS/NZS 1462.1:2001 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
-
AS/NZS 1462.20:1996
AS/NZS 1477:2006 cites AS/NZS 1462.20:1996 (R2017) Methods of test for plastics pipes and fittings - Method 20: Method for determination of long-term failure stress of PVC moulding compounds
-
AS/NZS 1462.3:1998
AS/NZS 1477:2006 cites AS/NZS 1462.3:1998 (R2017) Methods of test for plastics pipes and fittings - Method 3: Method for determining the impact characteristics of pipes
-
AS/NZS 1462.4:2002
AS/NZS 1477:2006 cites AS/NZS 1462.4:2002 (R2017) Methods of test for plastics pipes and fittings - Method 4: Method of determining reversion of UPVC pipes
-
AS/NZS 1462.6:1998
AS/NZS 1477:2006 cites AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings - Method 6: Method for hydrostatic pressure testing of pipes
-
AS/NZS 1462.8:1998
AS/NZS 1477:2006 cites AS/NZS 1462.8:1998 Methods of test for plastics pipes and fittings - Method 8: Method of test for infiltration
-
AS/NZS 2032:2006
AS/NZS 1477:2006 cites AS/NZS 2032:2006 Installation of PVC pipe systems
-
AS/NZS 2280:2004
AS/NZS 1477:2006 cites AS/NZS 2280:2004 Ductile iron pipes and fittings
-
AS/NZS 2544:1995
AS/NZS 1477:2006 cites AS/NZS 2544:1995 Grey iron pressure fittings
-
AS/NZS 3500.0:2003
AS/NZS 1477:2006 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
-
AS/NZS 3879:2006
AS/NZS 1477:2006 cites AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
-
AS/NZS 4020:2005
AS/NZS 1477:2006 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
Australian Standards
-
AS 1199.1-2003 (R2016)
AS/NZS 1477:2006 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
-
AS 1462.17-1988
AS/NZS 1477:2006 cites AS 1462.17-1988 Methods of test for unplasticized PVC (UPVC) pipes and fittings - Method 17: Method for testing pressure pipe joints with elastomeric seals
-
AS 1462.9-1984
AS/NZS 1477:2006 cites AS 1462.9-1984 Methods of test for unplasticized PVC (UPVC) pipes and fittings - Method 9: Method of hydrostatic pressure testing of UPVC pressure fittings
-
AS 1646.1-2000
AS/NZS 1477:2006 cites AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
-
AS 1646.2-2000
AS/NZS 1477:2006 cites AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
-
AS 1646.3-2000
AS/NZS 1477:2006 cites AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
-
AS 1722.1-1975
AS/NZS 1477:2006 cites AS 1722.1-1975 Pipe threads of Whitworth form - Part 1: Sealing pipe threads (metric units)
-
AS 1722.2-1992 (Reconfirmed in 2017)
AS/NZS 1477:2006 cites AS 1722.2-1992 (R2017) Pipe threads of Whitworth form - Part 2: Fastening pipe threads
-
AS 2888.1-2002
AS/NZS 1477:2006 cites AS 2888.1-2002 (R2017) Methods of testing plastics waste fittings -Method 1: Method of determining the suitability of connection threads of BSP form
Other
-
HB 18.28-2005
AS/NZS 1477:2006 cites HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products