Save

SR191 Seismic performance of brick veneer houses: Phase 3 - shake table tests on a concrete brick veneer room (2008)

Abbreviation
SR191
Valid from
01/01/2008

Information provider
´╗┐BRANZ Limited
Author
S. J. Thurston and G. J. Beattie
Information type
Study report
Format
PDF

Description

This is the fourth BRANZ investigation of a series looking into the seismic performance of brick veneer. The first two investigations were slow cyclic tests of full-scale veneer specimens where the veneer clad a rectangular room, which had both window and door openings. The third investigation was a shake table test of a clay brick veneer clad room, with an inertial mass to simulate roof loads.

The quality of brick veneer construction has improved markedly in recent years, with requirements for the ties to be screw-fixed to the timber framing and with the advent of lighter bricks with vertical penetrations. It is considered that the veneer may no longer be just a driver, but rather that it may have some lateral load-resisting capability.

The complete study is intended to improve the understanding of brick veneer construction in earthquakes, in particular:

  • to determine if brick veneer can be relied upon to carry most of the building seismic load or whether the building light timber framing construction should be designed to carry the entire load
  • to identify the level of seismic damage that can be expected in modern brick veneer construction.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 1.7MB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

SR191 Seismic performance of brick veneer houses: Phase 3 - shake table tests on a concrete brick veneer room (2008)

This document is not CITED BY any other resources:

SR191 Seismic performance of brick veneer houses: Phase 3 - shake table tests on a concrete brick veneer room (2008)

Description

This is the fourth BRANZ investigation of a series looking into the seismic performance of brick veneer. The first two investigations were slow cyclic tests of full-scale veneer specimens where the veneer clad a rectangular room, which had both window and door openings. The third investigation was a shake table test of a clay brick veneer clad room, with an inertial mass to simulate roof loads.

The quality of brick veneer construction has improved markedly in recent years, with requirements for the ties to be screw-fixed to the timber framing and with the advent of lighter bricks with vertical penetrations. It is considered that the veneer may no longer be just a driver, but rather that it may have some lateral load-resisting capability.

The complete study is intended to improve the understanding of brick veneer construction in earthquakes, in particular:

  • to determine if brick veneer can be relied upon to carry most of the building seismic load or whether the building light timber framing construction should be designed to carry the entire load
  • to identify the level of seismic damage that can be expected in modern brick veneer construction.

View on Information Provider website Download this resource (PDF, 1.7MB)
SR191 Seismic performance of brick veneer houses: Phase 3 - shake table tests on a concrete brick veneer room (2008)
Description

This is the fourth BRANZ investigation of a series looking into the seismic performance of brick veneer. The first two investigations were slow cyclic tests of full-scale veneer specimens where the veneer clad a rectangular room, which had both window and door openings. The third investigation was a shake table test of a clay brick veneer clad room, with an inertial mass to simulate roof loads.

The quality of brick veneer construction has improved markedly in recent years, with requirements for the ties to be screw-fixed to the timber framing and with the advent of lighter bricks with vertical penetrations. It is considered that the veneer may no longer be just a driver, but rather that it may have some lateral load-resisting capability.

The complete study is intended to improve the understanding of brick veneer construction in earthquakes, in particular:

  • to determine if brick veneer can be relied upon to carry most of the building seismic load or whether the building light timber framing construction should be designed to carry the entire load
  • to identify the level of seismic damage that can be expected in modern brick veneer construction.
View on Information Provider website Download this resource (PDF, 1.7MB)
This resource does not cite any other resources.

SR191 Seismic performance of brick veneer houses: Phase 3 - shake table tests on a concrete brick veneer room (2008)

This resource does not CITE any other resources.
Save
Feedback