Save

ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories

Abbreviation
ISO 9224:2012
Valid from
27/01/2012

Information provider
Standards New Zealand
Author
International Organisation for Standardization
Information type
ISO Standard
Format
PDF


Description

ISO 9224:2012 specifies guiding values of corrosion attack for metals and alloys exposed to natural outdoor atmospheres for exposures greater than one year. It is intended to be used in conjunction with ISO 9223.

Guiding corrosion values for standard structural materials can be used for engineering calculations. The guiding corrosion values specify the technical content of each of the individual corrosivity categories for these standard metals.

ISO 9224:2012 provides examples of calculated maximum corrosion attack after extended exposure (up to 20 years) for six standardized corrosivity categories.

It provides presumed average initial and steady-state corrosion rates of standard metals in intervals relative to six standardized corrosivity categories.

It provides the calculation procedure for corrosion attack of steels in regard to their composition.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories

This document is CITED BY:

ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories

Description

ISO 9224:2012 specifies guiding values of corrosion attack for metals and alloys exposed to natural outdoor atmospheres for exposures greater than one year. It is intended to be used in conjunction with ISO 9223.

Guiding corrosion values for standard structural materials can be used for engineering calculations. The guiding corrosion values specify the technical content of each of the individual corrosivity categories for these standard metals.

ISO 9224:2012 provides examples of calculated maximum corrosion attack after extended exposure (up to 20 years) for six standardized corrosivity categories.

It provides presumed average initial and steady-state corrosion rates of standard metals in intervals relative to six standardized corrosivity categories.

It provides the calculation procedure for corrosion attack of steels in regard to their composition.

View on Information Provider website
ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
Description

ISO 9224:2012 specifies guiding values of corrosion attack for metals and alloys exposed to natural outdoor atmospheres for exposures greater than one year. It is intended to be used in conjunction with ISO 9223.

Guiding corrosion values for standard structural materials can be used for engineering calculations. The guiding corrosion values specify the technical content of each of the individual corrosivity categories for these standard metals.

ISO 9224:2012 provides examples of calculated maximum corrosion attack after extended exposure (up to 20 years) for six standardized corrosivity categories.

It provides presumed average initial and steady-state corrosion rates of standard metals in intervals relative to six standardized corrosivity categories.

It provides the calculation procedure for corrosion attack of steels in regard to their composition.

View on Information Provider website
This resource does not cite any other resources.

ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories

This resource does not CITE any other resources.
Save
Feedback