Save

ISO 7240-11:2005 Fire detection and alarm systems Part 11: Manual call points

Abbreviation
ISO 7240-11:2005
Amendment
ISO 7240-11:2005/Amd 1:2009
Valid from
03/11/2005

Information provider
Standards New Zealand
Author
International Organization for Standardization
Information type
ISO Standard
Format
PDF


Description

ISO 7240-11:2005 specifies the requirements, test methods and performance criteria for manual call points in fire detection and fire alarm systems in and around buildings.

ISO 7240-11:2005 takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A "direct operation" and type B "indirect operation" and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control and indicating equipment for signalling and identifying, for example, an address or location.

ISO 7240-11:2005 does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 7240-11:2005 Fire detection and alarm systems Part 11: Manual call points

This document is CITED BY:

ISO 7240-11:2005 Fire detection and alarm systems Part 11: Manual call points

Description

ISO 7240-11:2005 specifies the requirements, test methods and performance criteria for manual call points in fire detection and fire alarm systems in and around buildings.

ISO 7240-11:2005 takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A "direct operation" and type B "indirect operation" and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control and indicating equipment for signalling and identifying, for example, an address or location.

ISO 7240-11:2005 does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests.

View on Information Provider website
ISO 7240-11:2005 Fire detection and alarm systems Part 11: Manual call points
Description

ISO 7240-11:2005 specifies the requirements, test methods and performance criteria for manual call points in fire detection and fire alarm systems in and around buildings.

ISO 7240-11:2005 takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A "direct operation" and type B "indirect operation" and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control and indicating equipment for signalling and identifying, for example, an address or location.

ISO 7240-11:2005 does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests.

View on Information Provider website
This resource does not cite any other resources.

ISO 7240-11:2005 Fire detection and alarm systems Part 11: Manual call points

This resource does not CITE any other resources.
Save
Feedback