ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

Abbreviation
ISO 3951-1:2005
Valid from
7/04/2005

Information provider
Standards New Zealand
Author
International Organization for Standardization
Information type
ISO Standard
Format
PDF, HARD COPY


Description

ISO 3951-1:2005 specifies an acceptance sampling system of single sampling plans for inspection by variables, in which the acceptability of a lot is implicitly determined from an estimate of the percentage of nonconforming items in the process, based on a random sample of items from the lot.

ISO 3951-1:2005 is primarily designed for application under the following conditions: where the inspection procedure is to be applied to a continuing series of lots of discrete products all supplied by one producer using one production process;

  • where only a single quality characteristic x of these products is taken into consideration, which must be measurable on a continuous scale;
  • where the measurement error is negligible, i.e. with a standard deviation no more than 10% of the process standard deviation;
  • where production is stable (under statistical control) and the quality characteristic x is distributed according to a normal distribution or a close approximation to the normal distribution;
  • where a contract or standard defines an upper specification limit U, a lower specification limit L, or both;
  • an item is qualified as conforming if and only if its measured quality characteristic x satisfies the appropriate one of the following inequalities:
    • x greater than or equal to L;
    • x less than or equal to U.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

This document is CITED BY:

ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

Description

ISO 3951-1:2005 specifies an acceptance sampling system of single sampling plans for inspection by variables, in which the acceptability of a lot is implicitly determined from an estimate of the percentage of nonconforming items in the process, based on a random sample of items from the lot.

ISO 3951-1:2005 is primarily designed for application under the following conditions: where the inspection procedure is to be applied to a continuing series of lots of discrete products all supplied by one producer using one production process;

  • where only a single quality characteristic x of these products is taken into consideration, which must be measurable on a continuous scale;
  • where the measurement error is negligible, i.e. with a standard deviation no more than 10% of the process standard deviation;
  • where production is stable (under statistical control) and the quality characteristic x is distributed according to a normal distribution or a close approximation to the normal distribution;
  • where a contract or standard defines an upper specification limit U, a lower specification limit L, or both;
  • an item is qualified as conforming if and only if its measured quality characteristic x satisfies the appropriate one of the following inequalities:
    • x greater than or equal to L;
    • x less than or equal to U.

View on Information Provider website
ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
Description

ISO 3951-1:2005 specifies an acceptance sampling system of single sampling plans for inspection by variables, in which the acceptability of a lot is implicitly determined from an estimate of the percentage of nonconforming items in the process, based on a random sample of items from the lot.

ISO 3951-1:2005 is primarily designed for application under the following conditions: where the inspection procedure is to be applied to a continuing series of lots of discrete products all supplied by one producer using one production process;

  • where only a single quality characteristic x of these products is taken into consideration, which must be measurable on a continuous scale;
  • where the measurement error is negligible, i.e. with a standard deviation no more than 10% of the process standard deviation;
  • where production is stable (under statistical control) and the quality characteristic x is distributed according to a normal distribution or a close approximation to the normal distribution;
  • where a contract or standard defines an upper specification limit U, a lower specification limit L, or both;
  • an item is qualified as conforming if and only if its measured quality characteristic x satisfies the appropriate one of the following inequalities:
    • x greater than or equal to L;
    • x less than or equal to U.
View on Information Provider website
This resource does not cite any other resources.

ISO 3951-1:2005 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

This resource does not CITE any other resources.
Feedback