IEC 60947-4-1:2000 + AMD1:2002 Low voltage switchgear and control gear - Part 4.1: Electromechanical contactors and motor-starters

Abbreviation
IEC 60947-4-1:2000 + AMD1:2002
Amendment
AMD1 - 2002
Valid from
17/12/2001

Information provider
International Electrotechnical Commission
Author
International Electrotechnical Commission
Information type
IEC Standard
Format
PDF, HARD COPY


Description

This standard applies to the contactors and motor-starters whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c.

States the characteristics of contactors and starters and associated equipment, the conditions with which contactors or starters shall comply (operation and behaviour, dielectric properties, the degrees of protection provided by their enclosures, their construction), the tests intended for confirming that these conditions have been met, the information to be given with the equipment or in the manufacturer's literature.

This publication supersedes IEC 60158-1 (1970) and its Amendment 1 (1983), 60158-1C (1982), 60292-1 (1969) and its Amendment 2 (1983), 60292-2 (1970), 60292-3 (1973) and 60292-4 (1975). It should be read in conjunction with IEC 60947-1. The contents of the corrigendum of July 2001 have been included in this copy. This consolidated version consists of the second edition (2000) and its amendment 1 (2002).

Scope

Starters and/or contactors dealt with in this standard are not normally designed to interrupt short-circuit currents. Therefore, suitable short-circuit protection forms part of the installation but not necessarily of the contactor or the starter.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

IEC 60947-4-1:2000 + AMD1:2002 Low voltage switchgear and control gear - Part 4.1: Electromechanical contactors and motor-starters

This document is CITED BY:

IEC 60947-4-1:2000 + AMD1:2002 Low voltage switchgear and control gear - Part 4.1: Electromechanical contactors and motor-starters

Description

This standard applies to the contactors and motor-starters whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c.

States the characteristics of contactors and starters and associated equipment, the conditions with which contactors or starters shall comply (operation and behaviour, dielectric properties, the degrees of protection provided by their enclosures, their construction), the tests intended for confirming that these conditions have been met, the information to be given with the equipment or in the manufacturer's literature.

This publication supersedes IEC 60158-1 (1970) and its Amendment 1 (1983), 60158-1C (1982), 60292-1 (1969) and its Amendment 2 (1983), 60292-2 (1970), 60292-3 (1973) and 60292-4 (1975). It should be read in conjunction with IEC 60947-1. The contents of the corrigendum of July 2001 have been included in this copy. This consolidated version consists of the second edition (2000) and its amendment 1 (2002).

View on Information Provider website
IEC 60947-4-1:2000 + AMD1:2002 Low voltage switchgear and control gear - Part 4.1: Electromechanical contactors and motor-starters
Description

This standard applies to the contactors and motor-starters whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c.

States the characteristics of contactors and starters and associated equipment, the conditions with which contactors or starters shall comply (operation and behaviour, dielectric properties, the degrees of protection provided by their enclosures, their construction), the tests intended for confirming that these conditions have been met, the information to be given with the equipment or in the manufacturer's literature.

This publication supersedes IEC 60158-1 (1970) and its Amendment 1 (1983), 60158-1C (1982), 60292-1 (1969) and its Amendment 2 (1983), 60292-2 (1970), 60292-3 (1973) and 60292-4 (1975). It should be read in conjunction with IEC 60947-1. The contents of the corrigendum of July 2001 have been included in this copy. This consolidated version consists of the second edition (2000) and its amendment 1 (2002).

View on Information Provider website
This resource does not cite any other resources.

IEC 60947-4-1:2000 + AMD1:2002 Low voltage switchgear and control gear - Part 4.1: Electromechanical contactors and motor-starters

This resource does not CITE any other resources.
Feedback