Save

IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

Abbreviation
IEC 60068-2-78:2001
Valid from
20/08/2001

Information provider
International Electrotechnical Commission
Author
International Electrotechnical Commission
Information type
IEC Standard
Format
PDF


Description

This standard provides a test method for determining the suitability of electrotechnical products, components or equipment for transportation, storage and use under conditions of high humidity.

The test is primarily intended to permit the observation of the effect of high humidity at constant temperature without condensation on the specimen over a prescribed period.

This test provides a number of preferred severities of high temperature, high humidity and test duration. It can be applied to both heat-dissipating and non-heat dissipating specimens.

The test is applicable to small equipment or components as well as large equipment having complex interconnections with test equipment external to the chamber, requiring a set-up time which prevents the use of preheating and the maintenance of specified conditions during the installation period.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

This document is CITED BY:

IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

Description

This standard provides a test method for determining the suitability of electrotechnical products, components or equipment for transportation, storage and use under conditions of high humidity.

The test is primarily intended to permit the observation of the effect of high humidity at constant temperature without condensation on the specimen over a prescribed period.

This test provides a number of preferred severities of high temperature, high humidity and test duration. It can be applied to both heat-dissipating and non-heat dissipating specimens.

The test is applicable to small equipment or components as well as large equipment having complex interconnections with test equipment external to the chamber, requiring a set-up time which prevents the use of preheating and the maintenance of specified conditions during the installation period.

View on Information Provider website
IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
Description

This standard provides a test method for determining the suitability of electrotechnical products, components or equipment for transportation, storage and use under conditions of high humidity.

The test is primarily intended to permit the observation of the effect of high humidity at constant temperature without condensation on the specimen over a prescribed period.

This test provides a number of preferred severities of high temperature, high humidity and test duration. It can be applied to both heat-dissipating and non-heat dissipating specimens.

The test is applicable to small equipment or components as well as large equipment having complex interconnections with test equipment external to the chamber, requiring a set-up time which prevents the use of preheating and the maintenance of specified conditions during the installation period.

View on Information Provider website
This resource does not cite any other resources.

IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

This resource does not CITE any other resources.
Save
Feedback