ICBO Evaluation AC148 Acceptance criteria for flashing materials

An online link to this resource is not currently available

Abbreviation
ICBO AC148
Valid from
1/01/2001

Information provider
International Code Council,
Author
International Conference of Building Officials
Information type
Standard,


Description

The acceptance criteria is limited to recognition of the following:

Hip and Ridge Tape: Synthetic butyl rubberbased membranes for use as a wind and rain block beneath hips and ridges of concrete or clay tile roofs under IBC ' Section 1507.3, IRC Section R905.3 and UBC Section ' 1507.7. The membranes self-adhere to substrates.

Self-adhering Flashing: Evaluation under this ' criteria is limited to rubber-based or modified asphalt membranes, or either of these materials laminated to a fabric or plastic film, used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.

Mechanically Attached Flashing: Evaluation ' under this criteria is limited to kraft-paper- or polymeric' based membranes used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.

For assistance with locating previous versions, please contact the information provider.
Notes/comments

An online link to ICBO AC148:2001 is not currently available.

You can obtain 2006 version from this weblink: https://global.ihs.com/doc_detail.cfm?document_name=ICBO%20AC148&item_s_key=00500442

An online link to this resource is not currently available

For assistance with locating previous versions, please contact the information provider.

An online link to ICBO AC148:2001 is not currently available.

You can obtain 2006 version from this weblink: https://global.ihs.com/doc_detail.cfm?document_name=ICBO%20AC148&item_s_key=00500442

This resource is cited by:

ICBO Evaluation AC148 Acceptance criteria for flashing materials

This document is CITED BY:

ICBO Evaluation AC148 Acceptance criteria for flashing materials

Description

The acceptance criteria is limited to recognition of the following:

Hip and Ridge Tape: Synthetic butyl rubberbased membranes for use as a wind and rain block beneath hips and ridges of concrete or clay tile roofs under IBC ' Section 1507.3, IRC Section R905.3 and UBC Section ' 1507.7. The membranes self-adhere to substrates.

Self-adhering Flashing: Evaluation under this ' criteria is limited to rubber-based or modified asphalt membranes, or either of these materials laminated to a fabric or plastic film, used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.

Mechanically Attached Flashing: Evaluation ' under this criteria is limited to kraft-paper- or polymeric' based membranes used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.

An online link to this resource is not currently available

ICBO Evaluation AC148 Acceptance criteria for flashing materials
Description

The acceptance criteria is limited to recognition of the following:

Hip and Ridge Tape: Synthetic butyl rubberbased membranes for use as a wind and rain block beneath hips and ridges of concrete or clay tile roofs under IBC ' Section 1507.3, IRC Section R905.3 and UBC Section ' 1507.7. The membranes self-adhere to substrates.

Self-adhering Flashing: Evaluation under this ' criteria is limited to rubber-based or modified asphalt membranes, or either of these materials laminated to a fabric or plastic film, used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.

Mechanically Attached Flashing: Evaluation ' under this criteria is limited to kraft-paper- or polymeric' based membranes used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.

An online link to this resource is not currently available

This resource cites:

ICBO Evaluation AC148 Acceptance criteria for flashing materials

This document CITES:
Feedback