Save

Metalcraft Insulated Panel System

Abbreviation
GM-CM30078- RevC
Version
Revision C - 5/02/2020
Valid from
28/06/2017

Information provider
Ministry of Business, Innovation and Employment
Author
Global-Mark
Information type
Product Certificate (CodeMark)
Format
PDF

Description

The Metalcraft Insulated Panel System comprises:

  • Fully finished internal/external wall and roofing panels, and
  • The following ancillary components:
    • 40x40x1.6mm aluminium angles
    • 12mm hold-down bolt
    • 10mm mushroom bolts
    • Flashings
    • 4.8x14.3mm (ASMG63.66) aluminium rivets
    • 70x50x5mm plate washers 
    • 14 gauge self-drilling screws with 25mm steel washer
    • Silicone sealant

The Metalcraft Insulated Panels are branded as:

  • ThermoPanel, and
  • ThermoSpan

They are manufactured from a Class S (AS1366.3-1992) expanded EPS core with factory laminated COLORSTEEL® facings of 0.4 to 0.6mm thickness.

The MetalCraft Insulated Panels are available in the following thicknesses (mm): 50, 75, 100, 150, 200, 250 and 300.

Scope

The Metalcraft Insulated Panel System is certified for use as:

  • a fully finished internal/external wall or roof cladding system or

  • a structural wall system providing bracing capacity for wind and seismic loads

For new or existing buildings within the following scope:

  • A risk score of 0-20, calculated using Table 1 & Table 2, Acceptable Solution E2/AS1, Third Edition including amendment

    8 (30/11/2018), and

  • Situated in all corrosion zones as defined in NZS3604:2011 except microclimate and less than 50m from breaking surf; and

  • Located further than 1m from the relevant boundary; and

  • With either:

    1. A Building height of up to 10m in wind zones up to and including extra high as defined in NZS3604:2011, or

    2. A building height determined by specific design limited by a maximum design differential wind pressure (ULS) of

      2.5kPa

  • Roof pitch minimum of 3 degrees; and

  • With timber or steel framing when used as a cladding. 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 273KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Metalcraft Insulated Panel System

This document is not CITED BY any other resources:

Metalcraft Insulated Panel System

Description

The Metalcraft Insulated Panel System comprises:

  • Fully finished internal/external wall and roofing panels, and
  • The following ancillary components:
    • 40x40x1.6mm aluminium angles
    • 12mm hold-down bolt
    • 10mm mushroom bolts
    • Flashings
    • 4.8x14.3mm (ASMG63.66) aluminium rivets
    • 70x50x5mm plate washers 
    • 14 gauge self-drilling screws with 25mm steel washer
    • Silicone sealant

The Metalcraft Insulated Panels are branded as:

  • ThermoPanel, and
  • ThermoSpan

They are manufactured from a Class S (AS1366.3-1992) expanded EPS core with factory laminated COLORSTEEL® facings of 0.4 to 0.6mm thickness.

The MetalCraft Insulated Panels are available in the following thicknesses (mm): 50, 75, 100, 150, 200, 250 and 300.

View on Information Provider website Download this resource (PDF, 273KB)
Metalcraft Insulated Panel System
Description

The Metalcraft Insulated Panel System comprises:

  • Fully finished internal/external wall and roofing panels, and
  • The following ancillary components:
    • 40x40x1.6mm aluminium angles
    • 12mm hold-down bolt
    • 10mm mushroom bolts
    • Flashings
    • 4.8x14.3mm (ASMG63.66) aluminium rivets
    • 70x50x5mm plate washers 
    • 14 gauge self-drilling screws with 25mm steel washer
    • Silicone sealant

The Metalcraft Insulated Panels are branded as:

  • ThermoPanel, and
  • ThermoSpan

They are manufactured from a Class S (AS1366.3-1992) expanded EPS core with factory laminated COLORSTEEL® facings of 0.4 to 0.6mm thickness.

The MetalCraft Insulated Panels are available in the following thicknesses (mm): 50, 75, 100, 150, 200, 250 and 300.

View on Information Provider website Download this resource (PDF, 273KB)
This resource does not cite any other resources.

Metalcraft Insulated Panel System

This resource does not CITE any other resources.
Save
Feedback