BS EN 12799:2000 Brazing - Non-destructive Examination Of Brazed Joints

Abbreviation
BS EN 12799:2000
Valid from
19/07/2000

Information provider
Standards New Zealand
Author
European Standardization Organisations, British Standards Institution
Information type
European Standard


Description

This European standard describes non-destructive examination procedures and test piece types necessary to perform the tests on brazed joints.

The non-destructive examination methods described are as follows:

  1. visual examination (see clause 4);
  2. ultrasonic examination (see clause 5);
  3. radiographic examination (see clause 6);
  4. penetrant examination (see clause 7);
  5. leak testing (see clause 8);
  6. proof testing (see clause 9);
  7. thermography (see clause 10).

The brazed joints to which these tests are applied can either be test samples manufactured to obtain brazed joint design data, or manufactured as part of the approval testing of a brazing procedure, or parts of a brazed assembly.

The type of test piece described for each test can be quoted or incorporated in engineering application standards that deal with brazed assemblies.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

BS EN 12799:2000 Brazing - Non-destructive Examination Of Brazed Joints

This document is CITED BY:

BS EN 12799:2000 Brazing - Non-destructive Examination Of Brazed Joints

Description

This European standard describes non-destructive examination procedures and test piece types necessary to perform the tests on brazed joints.

The non-destructive examination methods described are as follows:

  1. visual examination (see clause 4);
  2. ultrasonic examination (see clause 5);
  3. radiographic examination (see clause 6);
  4. penetrant examination (see clause 7);
  5. leak testing (see clause 8);
  6. proof testing (see clause 9);
  7. thermography (see clause 10).

The brazed joints to which these tests are applied can either be test samples manufactured to obtain brazed joint design data, or manufactured as part of the approval testing of a brazing procedure, or parts of a brazed assembly.

The type of test piece described for each test can be quoted or incorporated in engineering application standards that deal with brazed assemblies.

View on Information Provider website
BS EN 12799:2000 Brazing - Non-destructive Examination Of Brazed Joints
Description

This European standard describes non-destructive examination procedures and test piece types necessary to perform the tests on brazed joints.

The non-destructive examination methods described are as follows:

  1. visual examination (see clause 4);
  2. ultrasonic examination (see clause 5);
  3. radiographic examination (see clause 6);
  4. penetrant examination (see clause 7);
  5. leak testing (see clause 8);
  6. proof testing (see clause 9);
  7. thermography (see clause 10).

The brazed joints to which these tests are applied can either be test samples manufactured to obtain brazed joint design data, or manufactured as part of the approval testing of a brazing procedure, or parts of a brazed assembly.

The type of test piece described for each test can be quoted or incorporated in engineering application standards that deal with brazed assemblies.

View on Information Provider website
This resource does not cite any other resources.

BS EN 12799:2000 Brazing - Non-destructive Examination Of Brazed Joints

This resource does not CITE any other resources.
Feedback