BS EN 10253-3:2008 Butt-welding pipe fittings - wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- Abbreviation
- BS EN 10253-3:2008
- Valid from
- 31/12/2008
- Information provider
- British Standards Institution,
- Author
- British Standards Institution
- Information type
- British Standard,
- Format
- PDF, HARD COPY,
Description
This Part specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, capacities) made of austenitic and austenitic-ferritic (duplex) stainless steel without specific inspection requirements.
Scope
The Part specifies:
- steel grades
- mechanical properties
- dimensions and tolerances
- requirements for inspection and testing
- inspection documents
- marking
- protection and packaging.
This resource is cited by:
BS EN 10253-3:2008 Butt-welding pipe fittings - wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
This document is CITED BY:
-
G10/AS1 (Amd 8) (First Edition, Amendment 8)
BS EN 10253-3:2008 is cited by Acceptable Solution G10/AS1: Piped Services from 10/10/2011
-
G10/AS1 (First Edition, Amendment 7)
BS EN 10253-3:2008 is cited by Acceptable Solution G10/AS1: Piped Services from 10/10/2011
-
G10/AS1 (First Edition, Amendment 6)
BS EN 10253-3:2008 is cited by Acceptable Solution G10/AS1: Piped Services from 10/10/2011
-
NZS 4334:2012
BS EN 10253-3:2008 is cited by NZS 4334:2012 Platform lifts and low-speed lifts - SPONSORED
This resource cites:
BS EN 10253-3:2008 Butt-welding pipe fittings - wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
This document CITES:
BS EN 10253-3:2008 cites BS EN 10002-1:2001 Tensile testing of metallic materials. Part 1: Method of test at ambient temperature
BS EN 10253-3:2008 cites BS EN 10002-5:1992 Tensile testing of metallic materials. Method of test at elevated temperatures
BS EN 10253-3:2008 cites BS EN 10020:2000 Definition and classification of grades of steel
BS EN 10253-3:2008 cites BS EN 10021:2006 General technical delivery conditions for steel products
BS EN 10253-3:2008 cites BS EN 10027-1:2005 Designation system for steels. Steel names
BS EN 10253-3:2008 cites BS EN 10027-2:1992 Designation systems for steels. Steel numbers
BS EN 10253-3:2008 cites BS EN 10028-7:2000 Flat products made of steels for pressure purposes - Part 7: Stainless steels
BS EN 10253-3:2008 cites BS EN 10052:1994 Vocabulary of heat treatment terms for ferrous products
BS EN 10253-3:2008 cites BS EN 10079:2007 Definition of steel products
BS EN 10253-3:2008 cites BS EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
BS EN 10253-3:2008 cites BS EN 10088-3:2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN 10253-3:2008 cites BS EN 10168:2004 Steel Products - Inspection Documents - List Of Information And Description
BS EN 10253-3:2008 cites BS EN 10204:2004 Metallic materials. Types of inspection documents
BS EN 10253-3:2008 cites BS EN 10216-5:2004 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
BS EN 10253-3:2008 cites BS EN 10217-7:2005 Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
BS EN 10253-3:2008 cites BS EN 10266:2003 Steel Tubes, Fittings And Structural Hollow Sections - Symbols And Definitions Of Terms For Use In Product Standards
BS EN 10253-3:2008 cites BS EN 10272:2007 Stainless steel bars for pressure purposes
BS EN 10253-3:2008 cites BS EN 10296-2:2005 Welded Circular Steel Tubes For Mechanical And General Engineering Purposes - Technical Delivery Conditions - Part 2: Stainless Steel
BS EN 10253-3:2008 cites BS EN 10297-2:2005 Seamless Circular Steel Tubes For Mechanical And General Engineering Purposes - Technical Delivery Conditions - Part 2: Stainless Steel
BS EN 10253-3:2008 cites BS EN 1418:1998 Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
BS EN 10253-3:2008 cites BS EN 287-1:2004 Qualification test of welders. Fusion welding. Steels
BS EN 10253-3:2008 cites BS EN 910:1996 Destructive tests on welds in metallic materials. Bend tests
BS EN 10253-3:2008 cites BS EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding
BS EN 10253-3:2008 cites ISO 2566-2:1984: Steel - Conversion of elongation values Part 2: Austenitic Steel
BS EN 10253-3:2008 cites ISO 3166-1:2006 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes
BS EN 10253-3:2008 cites ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
BS EN 10253-3:2008 cites ISO 377:1997 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
BS EN 10253-3:2008 cites ISO 8493:1998 Metallic materials - Tube - Drift-expanding test
BS EN 10253-3:2008 cites ISO 8495:1998 Metallic materials - Tube - Ring-expanding test
BS EN 10253-3:2008 cites ISO 9001:2000 Quality management systems - Requirements