Save

BS EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels

Abbreviation
BS EN 10025-2:2004
Valid from
17/11/2004

Information provider
Standards New Zealand
Author
British Standards Institution, European Standardization Organisations
Information type
European Standard
Format
PDF


Description

This European Standard, a part of the BS EN 10025 series, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in chemical composition tables and mechanical properties tables in the delivery conditions. Chemical composition and mechanical properties of three engineering steels are also specified. This standard does not apply to structural hollow sections and tubes.

BS EN 10025-2:2004 is the same as EN 10025-2:2004

Scope

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 to 6 (chemical composition) and Tables 7 to 9 (mechanical properties) in the delivery conditions as given in 6.3. Three engineering steels are also specified in this document (see Tables 3 and 5) (chemical composition) and Table 8 (mechanical properties). This document does not apply to structural hollow sections and tubes (see EN 10210-1 and EN 10219-1).

The technical delivery conditions apply to thicknesses ≥ 3 mm and ≤ 150 mm for long products of steel grade S450J0. The technical delivery conditions apply to thicknesses ≤ 250 mm for flat and long products of all other grades and qualities. In addition for flat products of qualities J2 and K2 the technical conditions apply to thicknesses ≤ 400 mm.

Products made of steel grades S185, E295, E335 and E360 cannot be CE marked.

The steels specified in this Part 2 are not intended to be heat treated except products delivered in delivery condition +N. Stress relief annealing is permitted (see also the Note in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3).

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

BS EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels

This document is CITED BY:

BS EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels

Description

This European Standard, a part of the BS EN 10025 series, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in chemical composition tables and mechanical properties tables in the delivery conditions. Chemical composition and mechanical properties of three engineering steels are also specified. This standard does not apply to structural hollow sections and tubes.

BS EN 10025-2:2004 is the same as EN 10025-2:2004

View on Information Provider website
BS EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels
Description

This European Standard, a part of the BS EN 10025 series, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in chemical composition tables and mechanical properties tables in the delivery conditions. Chemical composition and mechanical properties of three engineering steels are also specified. This standard does not apply to structural hollow sections and tubes.

BS EN 10025-2:2004 is the same as EN 10025-2:2004

View on Information Provider website
This resource does not cite any other resources.

BS EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels

This resource does not CITE any other resources.
Save
Feedback