ASTM E96 / E96M - 05 Standard Test Methods for Water Vapor Transmission of Materials

Abbreviation
ASTM E96 / E96M - 05
Valid from
1/01/2005

Information provider
American Society of Testing and Materials
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF


Description

These test methods cover the determination of water vapor transmission (WVT) of materials through which the passage of water vapor may be of importance, such as paper, plastic films, other sheet materials, fiberboards, gypsum and plaster products, wood products, and plastics.

The test methods are limited to specimens not over 32 mm in thickness except as provided in Section 9.

Two basic methods, the Desiccant Method and the Water Method, are provided for the measurement of permeance, and two variations include service conditions with one side wetted and service conditions with low humidity on one side and high humidity on the other.

Agreement should not be expected between results obtained by different methods. The method should be selected that more nearly approaches the conditions of use.

Scope

This Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM E96 / E96M - 05 Standard Test Methods for Water Vapor Transmission of Materials

This document is CITED BY:

ASTM E96 / E96M - 05 Standard Test Methods for Water Vapor Transmission of Materials

Description

These test methods cover the determination of water vapor transmission (WVT) of materials through which the passage of water vapor may be of importance, such as paper, plastic films, other sheet materials, fiberboards, gypsum and plaster products, wood products, and plastics.

The test methods are limited to specimens not over 32 mm in thickness except as provided in Section 9.

Two basic methods, the Desiccant Method and the Water Method, are provided for the measurement of permeance, and two variations include service conditions with one side wetted and service conditions with low humidity on one side and high humidity on the other.

Agreement should not be expected between results obtained by different methods. The method should be selected that more nearly approaches the conditions of use.

View on Information Provider website
ASTM E96 / E96M - 05 Standard Test Methods for Water Vapor Transmission of Materials
Description

These test methods cover the determination of water vapor transmission (WVT) of materials through which the passage of water vapor may be of importance, such as paper, plastic films, other sheet materials, fiberboards, gypsum and plaster products, wood products, and plastics.

The test methods are limited to specimens not over 32 mm in thickness except as provided in Section 9.

Two basic methods, the Desiccant Method and the Water Method, are provided for the measurement of permeance, and two variations include service conditions with one side wetted and service conditions with low humidity on one side and high humidity on the other.

Agreement should not be expected between results obtained by different methods. The method should be selected that more nearly approaches the conditions of use.

View on Information Provider website
This resource cites:

ASTM E96 / E96M - 05 Standard Test Methods for Water Vapor Transmission of Materials

This document CITES:
Other
Feedback