ASTM E2652 - 16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

Abbreviation
ASTM E2652 - 16
Valid from
1/01/2016

Information provider
American Society of Testing and Materials
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF


Description

This fire-test-response test method covers the determination under specified laboratory conditions of combustion characteristics of building materials.

Results from this test method apply to the specific test apparatus and test conditions and are likely to vary when changes are made to one or more of the following:

  1. the size, shape, and arrangement of the specimen;
  2. the distribution of organice content;
  3. the exposure temperature;
  4. the air supply;
  5. the location of thermocouples.

The values stated in SI units are to be regarded as standard. The values given in paren1.5 This test method is technically equivalent to ISO 1182 (see also Annex A2 and 6.4.5).

Scope

Limitations of this fire-test response test method are:

  • This test method does not apply to laminated or coated materials.
  • This test method is not suitable or satisfactory for materials that soften, flow, melt, intumesce or otherwise separate from the measuring thermocouple.
  • This test method does not provide a measure of an intrinsic property.
  • This test method does not provide a quantitative measure of heat generation or combustibility; it simply serves as a test method with selected (end point) measures of combustibility.
  • This test method does not measure the self-heating tendencies of materials.
  • In this test method materials are not being tested in the nature and form used in building aplications. The test specimen consists of a small, specified volume that is either
    1. cut from a thick sheet;
    2. assembled from multiple thicknesses of thin sheets; or
    3. placed in a container if composed of grarnular powder or loose fiber materials.

This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM E2652 - 16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

This document is CITED BY:

ASTM E2652 - 16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

Description

This fire-test-response test method covers the determination under specified laboratory conditions of combustion characteristics of building materials.

Results from this test method apply to the specific test apparatus and test conditions and are likely to vary when changes are made to one or more of the following:

  1. the size, shape, and arrangement of the specimen;
  2. the distribution of organice content;
  3. the exposure temperature;
  4. the air supply;
  5. the location of thermocouples.

The values stated in SI units are to be regarded as standard. The values given in paren1.5 This test method is technically equivalent to ISO 1182 (see also Annex A2 and 6.4.5).

View on Information Provider website
ASTM E2652 - 16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
Description

This fire-test-response test method covers the determination under specified laboratory conditions of combustion characteristics of building materials.

Results from this test method apply to the specific test apparatus and test conditions and are likely to vary when changes are made to one or more of the following:

  1. the size, shape, and arrangement of the specimen;
  2. the distribution of organice content;
  3. the exposure temperature;
  4. the air supply;
  5. the location of thermocouples.

The values stated in SI units are to be regarded as standard. The values given in paren1.5 This test method is technically equivalent to ISO 1182 (see also Annex A2 and 6.4.5).

View on Information Provider website
This resource does not cite any other resources.

ASTM E2652 - 16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

This resource does not CITE any other resources.
Feedback