ASTM A449-87 STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

Abbreviation
ASTM A449-87
Valid from
27/02/1987

Information provider
IHS Markit,
Author
American Society of Testing and Materials
Information type
ASTM Standard,
Format
PDF, HARD COPY,


Description

This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 112 in.; and 90 ksi for diameters 134 in. to 3.0 in. inclusive. The term "fasteners" in this specification denotes hex cap screws, bolts, and studs.  

The fasteners are intended for general engineering use.  

The fasteners are furnished in diameters 14 to 3.0 in. inclusive. They are designated by type denoting chemical composition. 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A449-87 STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

This document is CITED BY:

ASTM A449-87 STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

Description

This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 112 in.; and 90 ksi for diameters 134 in. to 3.0 in. inclusive. The term "fasteners" in this specification denotes hex cap screws, bolts, and studs.  

The fasteners are intended for general engineering use.  

The fasteners are furnished in diameters 14 to 3.0 in. inclusive. They are designated by type denoting chemical composition. 

View on Information Provider website
ASTM A449-87 STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED STEEL BOLTS AND STUDS
Description

This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for diameters over 1.0 in. to 112 in.; and 90 ksi for diameters 134 in. to 3.0 in. inclusive. The term "fasteners" in this specification denotes hex cap screws, bolts, and studs.  

The fasteners are intended for general engineering use.  

The fasteners are furnished in diameters 14 to 3.0 in. inclusive. They are designated by type denoting chemical composition. 

View on Information Provider website
This resource does not cite any other resources.

ASTM A449-87 STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

This resource does not CITE any other resources.
Feedback