Save

ASTM A194/A194M-85A Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service.

Abbreviation
ASTM A194/A194M-85A
Version
Revision 85A
Valid from
27/12/1985

Information provider
IHS Markit
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF, Hard copy


Description

This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range ¼ through 4 in. [6.4 through 101.6 mm] nominal.

It also covers austenitic stainless steel nuts in the size range ¼ in. [6.4 mm] nominal and above. These nuts are intended for high-pressure or high-temperature service or both. Grade substitutions without the purchaser's permission are not allowed. 

Bars from which the nuts are made shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. 




For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A194/A194M-85A Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service.

This document is CITED BY:

ASTM A194/A194M-85A Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service.

Description

This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range ¼ through 4 in. [6.4 through 101.6 mm] nominal.

It also covers austenitic stainless steel nuts in the size range ¼ in. [6.4 mm] nominal and above. These nuts are intended for high-pressure or high-temperature service or both. Grade substitutions without the purchaser's permission are not allowed. 

Bars from which the nuts are made shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. 




View on Information Provider website
ASTM A194/A194M-85A Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service.
Description

This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range ¼ through 4 in. [6.4 through 101.6 mm] nominal.

It also covers austenitic stainless steel nuts in the size range ¼ in. [6.4 mm] nominal and above. These nuts are intended for high-pressure or high-temperature service or both. Grade substitutions without the purchaser's permission are not allowed. 

Bars from which the nuts are made shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. 




View on Information Provider website
This resource does not cite any other resources.

ASTM A194/A194M-85A Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service.

This resource does not CITE any other resources.
Save
Feedback