ASTM A182/A182M-85C STANDARD SPECIFICATION FOR FORGED OR ROLLED ALLOY-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH- TEMPERATURE SERVICE

Abbreviation
ASTM A182/A182M-85C
Version
Revision 85C
Valid from
26/06/1985

Information provider
IHS Markit,
Author
American Society of Testing and Materials
Information type
ASTM Standard,
Format
PDF, HARD COPY,


Description

This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards, such as ASME specifications 

For bars and products machined directly from bar (other than those directly addressed by this specification); refer to Specifications A479/A479M and A739 for the similar grades available in those specifications. Products made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. For larger products and products for other applications, refer to Specifications A336/A336M and A965/ A965M for the similar ferritic and austenitic grades, respectively, available in those specifications 

Several grades of low alloy steels and ferritic, martensitic, austenitic, and ferritic-austenitic stainless steels are included in this specification. Selection will depend upon design and service requirements. Several of the ferritic/ austenitic (duplex) grades are also found in Specification A1049/A1049M 

Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order 

For assistance with locating previous versions, please contact the information provider.
Notes/comments

ASME/ANSI B16.5-1988 cites  ASTM A182/A182M-85A, which is not currently available online. We have provided you with a link to this more recent version for your information only.

View on Information Provider website
For assistance with locating previous versions, please contact the information provider.

ASME/ANSI B16.5-1988 cites  ASTM A182/A182M-85A, which is not currently available online. We have provided you with a link to this more recent version for your information only.

This resource is cited by:

ASTM A182/A182M-85C STANDARD SPECIFICATION FOR FORGED OR ROLLED ALLOY-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH- TEMPERATURE SERVICE

This document is CITED BY:

ASTM A182/A182M-85C STANDARD SPECIFICATION FOR FORGED OR ROLLED ALLOY-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH- TEMPERATURE SERVICE

Description

This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards, such as ASME specifications 

For bars and products machined directly from bar (other than those directly addressed by this specification); refer to Specifications A479/A479M and A739 for the similar grades available in those specifications. Products made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. For larger products and products for other applications, refer to Specifications A336/A336M and A965/ A965M for the similar ferritic and austenitic grades, respectively, available in those specifications 

Several grades of low alloy steels and ferritic, martensitic, austenitic, and ferritic-austenitic stainless steels are included in this specification. Selection will depend upon design and service requirements. Several of the ferritic/ austenitic (duplex) grades are also found in Specification A1049/A1049M 

Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order 

View on Information Provider website
ASTM A182/A182M-85C STANDARD SPECIFICATION FOR FORGED OR ROLLED ALLOY-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH- TEMPERATURE SERVICE
Description

This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards, such as ASME specifications 

For bars and products machined directly from bar (other than those directly addressed by this specification); refer to Specifications A479/A479M and A739 for the similar grades available in those specifications. Products made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. For larger products and products for other applications, refer to Specifications A336/A336M and A965/ A965M for the similar ferritic and austenitic grades, respectively, available in those specifications 

Several grades of low alloy steels and ferritic, martensitic, austenitic, and ferritic-austenitic stainless steels are included in this specification. Selection will depend upon design and service requirements. Several of the ferritic/ austenitic (duplex) grades are also found in Specification A1049/A1049M 

Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order 

View on Information Provider website
This resource does not cite any other resources.

ASTM A182/A182M-85C STANDARD SPECIFICATION FOR FORGED OR ROLLED ALLOY-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH- TEMPERATURE SERVICE

This resource does not CITE any other resources.
Feedback