Save

ASTM A182 - 78 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

Abbreviation
ASTM A182 - 78
Valid from
28/07/1978

Information provider
IHS Markit
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF, Hard copy


Description

This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards such as the ANSI specifications that are referenced in Section 2. 

Other forgings for other applications may be made to this specification. 

Thirty-three grades are covered including sixteen ferritic or martensitic steels and seventeen austenitic stainless steels.  Selection will depend upon design and service requirements. 

Supplementary requirements are provided for use when additional testing or inspection is desired.  These shall apply only when specified individually by the purchaser in the order. 

Note 1 - The values stated in the U.S. customary units are to be regarded as the standard. 

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A182 - 78 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

This document is CITED BY:

ASTM A182 - 78 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

Description

This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards such as the ANSI specifications that are referenced in Section 2. 

Other forgings for other applications may be made to this specification. 

Thirty-three grades are covered including sixteen ferritic or martensitic steels and seventeen austenitic stainless steels.  Selection will depend upon design and service requirements. 

Supplementary requirements are provided for use when additional testing or inspection is desired.  These shall apply only when specified individually by the purchaser in the order. 

Note 1 - The values stated in the U.S. customary units are to be regarded as the standard. 

 

View on Information Provider website
ASTM A182 - 78 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Description

This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards such as the ANSI specifications that are referenced in Section 2. 

Other forgings for other applications may be made to this specification. 

Thirty-three grades are covered including sixteen ferritic or martensitic steels and seventeen austenitic stainless steels.  Selection will depend upon design and service requirements. 

Supplementary requirements are provided for use when additional testing or inspection is desired.  These shall apply only when specified individually by the purchaser in the order. 

Note 1 - The values stated in the U.S. customary units are to be regarded as the standard. 

 

View on Information Provider website
This resource does not cite any other resources.

ASTM A182 - 78 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

This resource does not CITE any other resources.
Save
Feedback