AS/NZS 4548.1:1999 (R2013) Guide to long-life coatings for concrete and masonry - Wall coatings - Latex extensible

Abbreviation
AS/NZS 4548.1:1999
Valid from
4/04/1999

Information provider
Standards New Zealand
Author
Standards New Zealand, Standards Australia
Information type
New Zealand Standard
Format
PDF, HARD COPY


Description

This Standard provides a guide to the features and typical characteristics of long-life extensible coatings intended for exterior or interior use on concrete and masonry, when applied by airless spray or roller in accordance with the manufacturer's instructions.

Scope

Paints covered by this Standard are classified as paint Type 38 of AS 2311 and correspond generally to Australian Paint Approval Scheme specification Type 2 of GPCC- 117.

Latex extensible wall coatings are generally referred to as membrane coatings. They are non-aggregate, flexible, watertight finishes which are applied to prevent the ingress of moisture and which will retain flexibility at varying temperatures, so accommodating expansion or contraction of the substrate. Extensible coatings also provide anticarbonation resistance.

These coatings are not intended for use on horizontal surfaces where water ponding is possible. They are normally specified in systems that may have a sealer and multiple coats.

Application of membrane coatings may be by airless spray, textured roller (low profile texture) or nap roller and typically would be at a spreading rate of 1.02.0 m2/L (1.0?0.5 L/m2) per coat. The total film thickness applied will be critical in achieving required levels of performance, particularly crack bridging where higher film thicknesses improves this property.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS/NZS 4548.1:1999 (R2013) Guide to long-life coatings for concrete and masonry - Wall coatings - Latex extensible

This document is CITED BY:

AS/NZS 4548.1:1999 (R2013) Guide to long-life coatings for concrete and masonry - Wall coatings - Latex extensible

Description

This Standard provides a guide to the features and typical characteristics of long-life extensible coatings intended for exterior or interior use on concrete and masonry, when applied by airless spray or roller in accordance with the manufacturer's instructions.

View on Information Provider website
AS/NZS 4548.1:1999 (R2013) Guide to long-life coatings for concrete and masonry - Wall coatings - Latex extensible
Description

This Standard provides a guide to the features and typical characteristics of long-life extensible coatings intended for exterior or interior use on concrete and masonry, when applied by airless spray or roller in accordance with the manufacturer's instructions.

View on Information Provider website
This resource does not cite any other resources.

AS/NZS 4548.1:1999 (R2013) Guide to long-life coatings for concrete and masonry - Wall coatings - Latex extensible

This resource does not CITE any other resources.
Feedback