Table of Contents

Section 1 Scope And General

1.1 Scope

1.2 Referenced Documents

1.3 Definitions

1.4 Notation

1.5 Classification

1.6 Marking

1.7 Solvent Cements

1.8 Elastomeric Jointing Seals

1.9 Storage And Transport

Section 2 Performance Requirements

2.1 Scope

2.2 Composition

2.3 Rerating At Elevated Temperatures

2.4 Dimensions

2.5 Freedom From Defects

2.6 Effect On Water

2.7 Pipe Tests

2.8 Fittings Tests

2.9 Elastomeric Seal Joint Tests

2.10 Testing Summary

Section 3 Design Requirements

3.1 Pipes

3.2 Moulded Fittings

3.3 Post-Formed Bends And Couplings

3.4 Elastomeric Seal Joints

3.5 Flanged Ends On Fittings

Appendices

Appendix A - Means Demonstrating Compliance With This Standard

Appendix B - Preparation Of Test Specimen For Short-Term Pressure Test

Appendix C - Determination Of Multipliers For Elastomeric Seal Joint Hydrostatic Pressure Test

Appendix D - Design Wall Thickness For Series 1, Series 2 And Series 3 Pipes For Special Applications

Appendix E - Calculation Of Maximum Allowable Operating Pressure (Maop) At 20c For Series 1, Series 2 And Series 3 Pipes

Appendix F - Determination Of 99.5% Lower Prediction Limit Of The One Hour Hydrostatic Strength (O 1 Hr, Lpl, 0.995)