Save

AS/NZS 2269:1994 Plywood - Structural

Abbreviation
AS/NZS 2269:1994
Amendment
AS/NZS 2269:1994A1 . - This amendment must be purchased separately. Published 04/10/1996.
Valid from
13/06/1994

Information provider
Standards New Zealand
Author
Standards New Zealand, Standards Australia
Information type
New Zealand Standard
Format
PDF


Description

This Standard specifies requirements for the manufacture and grading of structural plywood. Specifications for both stress and surface grades are also provided. The Standard also specifies veneer qualities, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and basic working stresses for the nominated stress grades.

The following alternative methods for the determination of stress grades for structural plywood, are also provided -

  • (a) species identification;
  • (b) density determination;
  • (c) veneer stiffness determination;
  • (d) mechanical stress grading of the finished sheet of plywood; or
  • (e) in-grade testing of finished plywood panels.

Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed.

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Standard is superseded by AS/NZS 2269:2004, which is superseded by AS/NZS 2269.0:2008, which is superseded by AS/NZS 2269.0:2012

View on Information Provider website
For assistance with locating previous versions, please contact the information provider.

This Standard is superseded by AS/NZS 2269:2004, which is superseded by AS/NZS 2269.0:2008, which is superseded by AS/NZS 2269.0:2012

This resource is cited by:

AS/NZS 2269:1994 Plywood - Structural

This document is CITED BY:

AS/NZS 2269:1994 Plywood - Structural

Description

This Standard specifies requirements for the manufacture and grading of structural plywood. Specifications for both stress and surface grades are also provided. The Standard also specifies veneer qualities, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and basic working stresses for the nominated stress grades.

The following alternative methods for the determination of stress grades for structural plywood, are also provided -

  • (a) species identification;
  • (b) density determination;
  • (c) veneer stiffness determination;
  • (d) mechanical stress grading of the finished sheet of plywood; or
  • (e) in-grade testing of finished plywood panels.

Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed.

View on Information Provider website
AS/NZS 2269:1994 Plywood - Structural
Description

This Standard specifies requirements for the manufacture and grading of structural plywood. Specifications for both stress and surface grades are also provided. The Standard also specifies veneer qualities, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and basic working stresses for the nominated stress grades.

The following alternative methods for the determination of stress grades for structural plywood, are also provided -

  • (a) species identification;
  • (b) density determination;
  • (c) veneer stiffness determination;
  • (d) mechanical stress grading of the finished sheet of plywood; or
  • (e) in-grade testing of finished plywood panels.

Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed.

View on Information Provider website
This resource does not cite any other resources.

AS/NZS 2269:1994 Plywood - Structural

This resource does not CITE any other resources.
Save
Feedback