AS/NZS 2269.0:2008 Plywood - Structural - Specifications | Building CodeHub

Resource detail

AS/NZS 2269.0:2008 Plywood - Structural - Specifications

View on Information Provider website

Abbreviation: AS/NZS 2269.0:2008
Valid from: 4/08/2008
Replaces: AS/NZS 2269:2004

Information provider: Standards New Zealand
Author: Standards New Zealand, Standards Australia
Information type: New Zealand Standard
Format: PDF, HARD COPY

Cited By: This resource is cited by 8 documents (show Citations)
Cites: This resource cites 13 documents (show Citations)

Description

This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided.

Scope

The Standard also specifies veneer quality, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades.

The following alternative methods for the determination of stress grades for structural plywood are also provided:

a) Mechanical F-grading of the finished sheet of plywood;
b) In-grade testing of finished plywood panels;
c) In-grade testing of finished plywood panels.

Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed

For assistance with locating previous versions, please contact the information provider.

Notes/comments

This Standard is superseded by AS/NZS 2269.0:2012

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This Standard is superseded by AS/NZS 2269.0:2012

This resource is cited by:

AS/NZS 2269.0:2008 Plywood - Structural - Specifications

This document is CITED BY:

E2/AS1 (Amd 7) (Third Edition, Amendment 7)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 6) (Third Edition, Amendment 6)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 5) (Third Edition, Amendment 5)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 8) (Third Edition, Amendment 8)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 9) (Third Edition, Amendment 9)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 10) (Third Edition, Amendment 10)

AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
NZS 3604:2011

AS/NZS 2269.0:2008 is cited by NZS 3604:2011 Timber-framed buildings - SPONSORED

AS/NZS 2269.0:2008 Plywood - Structural - Specifications

Description

This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided.

View on Information Provider website

AS/NZS 2269.0:2008 Plywood - Structural - Specifications

Description

This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided.

View on Information Provider website

This resource cites:

AS/NZS 2269.0:2008 Plywood - Structural - Specifications

This document CITES:

New Zealand Standards

AS/NZS 1604.3:2002

AS/NZS 2269.0:2008 cites AS/NZS 1604.3:2002 Specification for preservative treatment - Plywood
AS/NZS 2098.11:2005

AS/NZS 2269.0:2008 cites AS/NZS 2098.11:2005 (R2016) Methods of test for veneer and plywood - Part 11: Determination of formaldehyde emissions for plywood
AS/NZS 2098.1:1996

AS/NZS 2269.0:2008 cites AS/NZS 2098.1:1996 Methods of test for veneer and plywood - Method 1: Moisture content of veneer and plywood
AS/NZS 2098.2:1996

AS/NZS 2269.0:2008 cites AS/NZS 2098.2:1996 Methods of test for veneer and plywood - Method 2: Bond quality of plywood (chisel test)
AS/NZS 2098.3:1996

AS/NZS 2269.0:2008 cites AS/NZS 2098.3:1996 Methods of test for veneer and plywood - Method 3: Bond quality and strength of scarf joints in plywood
AS/NZS 2098.4:2006

AS/NZS 2269.0:2008 cites AS/NZS 2098.4:2006 (R2016) Methods of test for veneer and plywood - Part 4: Measurement of dimensions and shape for sheets of veneer and plywood
AS/NZS 2269.1:2008

AS/NZS 2269.0:2008 cites AS/NZS 2269.1:2008 Plywood - Structural - Determination of structural properties - Test methods
AS/NZS 2269.2:2007

AS/NZS 2269.0:2008 cites AS/NZS 2269.2:2007 Plywood - Structural - Determination of structural properties - Evaluation methods
AS/NZS 2754.1(Int):2008

AS/NZS 2269.0:2008 cites AS/NZS 2754.1(Int):2008 Adhesives for timber and timber products - Part 1: Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
AS/NZS 4063:1992

AS/NZS 2269.0:2008 cites AS/NZS 4063:1992 Timber - Stress-graded - In-grade strength and stiffness evaluation
AS/NZS 4491:1997

AS/NZS 2269.0:2008 cites AS/NZS 4491:1997 (R2016) Timber - Glossary of terms in timber related Standards
NZS 3603:1993

AS/NZS 2269.0:2008 cites NZS 3603:1993 Timber structures standard

Australian Standards

AS 1720.1-1997

AS/NZS 2269.0:2008 cites AS 1720.1-1997 Timber structures - Part 1: Design methods

Feedback